« previous next »
Pages: [1]

Author Topic: Can this be saved?  (Read 1653 times)

0 Members and 1 Guest are viewing this topic.

Offline snag

  • Member
  • Posts: 419
Can this be saved?
« on: November 05, 2010, 02:24:11 pm »
This is my first attempt at a selfbow. I was so eager to build this I didn't think it through.


This above picture is of the belly of this hazelnut stave.  I made the mistake of taking wood off of the back!  I know...stupid!  Anyway, here is a picture of the back..



There is a lot of wood still to bring this down to a workable bow. But since I have violated the back is it possible to still make a bow out of this?  It is extremely hard
to see growth rings in this light colored wood. I was told I could chase a ring...but I don't know if I can see one!  Just hate to think this is now kindling.... :(
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline 0209

  • Member
  • Posts: 107
Re: Can this be saved?
« Reply #1 on: November 05, 2010, 02:29:56 pm »
You can rawhide back it.  I'm pretty sure that ought to work.  But more importantly is SLOW DOWN...lol.  Slow is smooth; smooth is fast.  Best of luck.
Logged
Somewhere a True Believer is training to kill you. He is training is austere conditions with minimal food and water. He doesn't worry about what workout to do.his ruck weighs what it weighs and his runs end when the enemy stops chasing him. Only he knows the cause. Still want to Quit?
-Unknown

Offline Parnell

  • Member
  • Posts: 5,556
Re: Can this be saved?
« Reply #2 on: November 05, 2010, 02:31:37 pm »
I'm wondering if you can smooth the rasp marks out, scrape the remainder of the stave to have a similar crowned back and perhaps back it with something, linen, silk, rawhide?
Just a thought.
Logged
1’—>1’

Offline snag

  • Member
  • Posts: 419
Re: Can this be saved?
« Reply #3 on: November 05, 2010, 02:58:06 pm »
Parnell, that is what I am wondering too. Nothing to lose at this point I guess....other than more work on it.
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: Can this be saved?
« Reply #4 on: November 05, 2010, 03:33:40 pm »
 You can rawhide back it or silk would work. There is also sinew too,
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Jorad

  • Member
  • Posts: 10
Re: Can this be saved?
« Reply #5 on: November 05, 2010, 08:58:39 pm »
You can do just about anything to the back of a hazel stave. The wood is so homogeneous that you don;t have to worry about violations on the back.
Just work it down to a nice and smooth and flat surface and you'll be fine, I've done it before and with success I might add. That's why I love hazel, its almost like working with clay; easy to work with and endless possibilities!

Good Luck!
Logged

Offline snag

  • Member
  • Posts: 419
Re: Can this be saved?
« Reply #6 on: November 05, 2010, 09:37:10 pm »
Jorad, really?  Should I still back it with sinew or something?
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: Can this be saved?
« Reply #7 on: November 05, 2010, 11:25:11 pm »
 Do what Jorad said and if it lifts a splinter, back it with rawhide.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?
Pages: [1]
« previous next »