Author Topic: ash backed oak  (Read 2263 times)

0 Members and 1 Guest are viewing this topic.

Offline SA

  • Member
  • Posts: 452
ash backed oak
« on: November 02, 2010, 05:20:50 pm »
i made this for my nephew that just turned thirteen he has been using fiberglass but i changed that  ;D it is 60" ntn low 40 # at 28" even though it says 26" "just figured out that you dont tiller to the inside of the handle" . it is red oak backed w/white ash w/ mullberry tip overlays. this is a great combination and shoots suprisingly fast.

[attachment deleted by admin]
Shawn Acker

Offline SA

  • Member
  • Posts: 452
Re: ash backed oak
« Reply #1 on: November 02, 2010, 05:23:01 pm »
...

[attachment deleted by admin]
Shawn Acker

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: ash backed oak
« Reply #2 on: November 02, 2010, 05:26:30 pm »
He's going to like that, good job.
Jeff
Genesis 27: 3

Offline half eye

  • Member
  • Posts: 3,300
Re: ash backed oak
« Reply #3 on: November 02, 2010, 08:01:10 pm »
love the low braced profile, a pure classic. The full draw is equally impressive.
rich

Offline SA

  • Member
  • Posts: 452
Re: ash backed oak
« Reply #4 on: November 03, 2010, 10:52:56 pm »
thanks, he likes it alot, lotta fun to make too.
Shawn Acker

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: ash backed oak
« Reply #5 on: November 04, 2010, 08:01:14 am »
Nice bow,love the grip and tips. He should love that. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: ash backed oak
« Reply #6 on: November 09, 2010, 01:01:49 pm »
Very fine tiller on that bow... way to bring one over from the dark side (world of fiberglass)  ;D  Got it bookmarked for backed bows November BOM contest!  :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline AncientArcher76

  • Member
  • Posts: 1,113
Re: ash backed oak
« Reply #7 on: November 09, 2010, 01:10:46 pm »
Nice work!

Russ
Time, dedication, cuts, tons of broken rock, a wife, and perhaps a few girlfriends are some of what it takes in becoming a skilled flint knapper!!!
 
"Ancient Art"  by R. Hill