« previous next »
Pages: [1]

Author Topic: makeing a osage long bow into a osage recurve??  (Read 1269 times)

0 Members and 1 Guest are viewing this topic.

Offline jp gray

  • Member
  • Posts: 53
makeing a osage long bow into a osage recurve??
« on: October 22, 2010, 10:26:19 pm »
have a 62" osage self bow 62" nock to nock 47-50@28 elk sinew back with snake skin on top ,could i make this into a curve,its all been tillered and have been shooting, was just wondering if anyone has done this? i love my self bow but a osage curve just puts a fire in my eye ,i have one from curt brisky hopeing in a month comeing to me .im not going to try it i love it to much ,i was just wondering if anyone has done it.
Logged
john paul gray

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: makeing a osage long bow into a osage recurve??
« Reply #1 on: October 22, 2010, 11:59:35 pm »
It can be done but it will add more stress to the bow. Also, where you heat the tips to recurve them the sinew backing should be removed. The heat needed to bend the wood will overheat the glue and sinew.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline kylerprochaska

  • Member
  • Posts: 353
Re: makeing a osage long bow into a osage recurve??
« Reply #2 on: October 23, 2010, 03:43:29 am »
I have put curves in an osage selfbow before to gain a few extra lb's but never with sinew.... I think I would get a new stave and start from scratch.  Good Luck!
Logged
GBR!

Offline bowmo

  • Member
  • Posts: 1,035
Re: makeing a osage long bow into a osage recurve??
« Reply #3 on: October 23, 2010, 01:35:22 pm »
I agree. More trouble than it's work in my mind. But it could be done.

dan
Logged
Pages: [1]
« previous next »