« previous next »
Pages: [1]

Author Topic: Finish for Ipe  (Read 2261 times)

0 Members and 1 Guest are viewing this topic.

Offline NTProf

  • Member
  • Posts: 250
Finish for Ipe
« on: October 15, 2010, 12:40:41 am »
What is the best finish to use for Ipe and other oily woods?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: Finish for Ipe
« Reply #1 on: October 15, 2010, 01:01:34 am »
I've used Tru0Oil but it takes a few days for the first few coats to dry. You can seal it with shellac first then use whichever finish you normally use. Do a test first to be sure.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sailordad

  • Member
  • Posts: 5,045
Re: Finish for Ipe
« Reply #2 on: October 15, 2010, 01:05:48 am »
ive used tung oil with good results\just rub the first couple of coats in by hand real good
and dont put it on to heavy,as it will take much longer to dry
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: Finish for Ipe
« Reply #3 on: October 15, 2010, 01:14:08 pm »
Deft, even comes in a spray can.Dries fast, 30 min. or so.Comes in satin or gloss,I like satin less shine.
Jeff
Logged
Genesis 27: 3

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Finish for Ipe
« Reply #4 on: October 15, 2010, 01:29:37 pm »
Call me lazy, but I usually just rub on Tung oil and have not had problems.    Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline bubby

  • Member
  • Posts: 11,054
Re: Finish for Ipe
« Reply #5 on: October 15, 2010, 04:05:21 pm »
tung oil, rub it really thin, it's worked for me
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline NTProf

  • Member
  • Posts: 250
Re: Finish for Ipe
« Reply #6 on: October 15, 2010, 04:38:07 pm »
Thanks a lot, guys.
Logged
Pages: [1]
« previous next »