Author Topic: good string to tie fletching on?  (Read 11027 times)

0 Members and 1 Guest are viewing this topic.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: good string to tie fletching on?
« Reply #15 on: September 25, 2010, 11:09:43 pm »
Poly-cotton thread that can be bought at Wally world or any fabric store.  Cheap, strong, and can be glued down with anything.  Nice variety of colors too.  Might be a bit time consuming because the thread is very fine.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Loki

  • Member
  • Posts: 381
Re: good string to tie fletching on?
« Reply #16 on: September 27, 2010, 03:28:06 am »
The best thread I have found (after silk) is 'Gutermans top stitch' It's thicker than normal cotton which I find far too thin for whipping.

« Last Edit: September 28, 2010, 02:56:18 pm by Loki »
Durham,England

Offline Cromm

  • Member
  • Posts: 1,065
Re: good string to tie fletching on?
« Reply #17 on: September 27, 2010, 07:57:27 pm »
The best thread I have found (after silk) is 'Gutermans top stitch' It's thicker than normal cotton which I find far to thin for whipping.



That's the stuff I use you can get it in lots of colours and it works real well. Just have to make sure you get the green reel ones for right thickness.
Great Britain.
Home of the Longbowman.

Offline bow-toxo

  • Member
  • Posts: 337
Re: good string to tie fletching on?
« Reply #18 on: October 06, 2010, 05:03:47 pm »
Silk is my recommendation, also.

 Me too.

                                                                   Erik

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: good string to tie fletching on?
« Reply #19 on: October 06, 2010, 08:53:05 pm »
There's a couple of things I use.  One that is easy is 100% cotton quilting thread, a bit pricey but very strong stuff.  The other, which I actually prefer but is a pain to get, is the individual threads in baling twine.  You have to cut the twine then pulls out the threads one by one and most are too short to use.  Both are natural fibers
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com