« previous next »
Pages: [1]

Author Topic: Need dimensions on bendy osage bow  (Read 1604 times)

0 Members and 1 Guest are viewing this topic.

Offline JonW

  • Member
  • Posts: 1,906
Need dimensions on bendy osage bow
« on: October 03, 2010, 05:43:35 pm »
I am wanting to build a "short" style of bow that bends in the handle. I am going to back it with sinew as well. I would like to get 26" of draw and 50#-55#.  What width would you guys go with and length. 


Jon W.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: Need dimensions on bendy osage bow
« Reply #1 on: October 04, 2010, 07:47:13 am »
You could get by with 50+ in length. 55or 56 should be safe enough if you take your time on the tillering.I would say an inch wide would make that weight on that short of a bow if it is some good
Osage.  :) Good luck and keep us updated.  :)     
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »