Author Topic: 61 1/2" osage splinter (Read 18932 times)

Hillbilly · « **Reply #15 on:** April 23, 2007, 08:51:40 am »

Great looking little weapon, Pat, just looks like it would have to shoot good, too.

GregB · « **Reply #16 on:** April 23, 2007, 08:55:05 am »

Another nice one Pat! Tiller looks like you nailed it once again!

Marc St Louis · « **Reply #17 on:** April 23, 2007, 09:06:09 am »

Nice Pat

Jbell · « **Reply #18 on:** April 23, 2007, 09:14:23 am »

Great lookin splinter their Pat, tiller is perfect.

AndrewS · « **Reply #19 on:** April 23, 2007, 09:43:36 am »

Hi Pat,
you are a bowmakingmachine, eh?

In future every splinter of osage is going to nice bows, I think. Very good work and tiller on this one!

George Tsoukalas · « **Reply #20 on:** April 23, 2007, 10:30:09 am »

That is a beautiful bow, Pat. Great tiller. I've seen quite a few bows in front of that building. Jawge

Pat B · « **Reply #21 on:** April 23, 2007, 10:54:24 am »

Thanks everyone.
Jawge, That building is becoming as much of an institution an your sweat pants.

Pat

Mechslasher · « **Reply #22 on:** April 23, 2007, 11:19:04 am »

nice bow pat!! that would make a nice 3D bow. could shoot it all day.

Pappy · « **Reply #23 on:** April 23, 2007, 11:24:20 am »

Another nice one Pat,Some times it just ant meant to be you just have to go with what you have to work with and looks like you done a fine job of that.

Pappy

DanaM · « **Reply #24 on:** April 23, 2007, 11:53:04 am »

Nice bow Pat, looks like a nice shooter to me.

I wanna know about the Mr. Potato Head tree decorations

DanaM

Pat B · « **Reply #25 on:** April 23, 2007, 12:42:28 pm »

Dana, My daughter gave us that tree face. They are molded plastic and look quite real...if I didn't know better.

Pat

OldBow · « **Reply #26 on:** April 23, 2007, 01:19:16 pm »

When you think how many would have made a bean pole out of splinter like that.
Nice job, Pat. - Bookmarked, too

kismet · « **Reply #27 on:** April 23, 2007, 03:24:53 pm »

pat

great looking little osage bow! i have some staves that i am looking to turn into light bows for kids. could you give me some thickness dimensions back to belly of your limbs at handle/fade/midlimb/tip? i'd love to have a starting place.

thanks!

stan

Pat B · « **Reply #28 on:** April 23, 2007, 05:18:02 pm »

Stan, The thickness at the fades of this bow is 5/8" but the width is only 3/4" or so. If you are working with board bows 1/2" at the fades will get you started. I very rarely measure thickness. I make the bow the length and width and just remove wood until I get the weight I'm looking for. Pat

Dingleberry · « **Reply #29 on:** April 23, 2007, 10:26:41 pm »

awesome bow, i learn alot from seeing your bows and reading your descriptions.

Primitive Archer