Author Topic: HELP! Crack in bow 5 weeks before opening day  (Read 3504 times)

0 Members and 1 Guest are viewing this topic.

Offline tgr

  • Member
  • Posts: 92
HELP! Crack in bow 5 weeks before opening day
« on: September 13, 2010, 09:59:25 pm »
I recently heated and straightened my lower limb.  I noticed a crack around a knot.  Not sure if I can sand it out or glue it down.  I also noticed a hinge around the knot about 1/4 of the way down the left limb.

Any advice would be helpful.  72" beechwood, 55# backed with a linen skakeskin.

Tom R

[attachment deleted by admin]

Offline tgr

  • Member
  • Posts: 92
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #1 on: September 13, 2010, 10:01:44 pm »
I can't believe how small these pix are.  I wouldn't allow me to attach anything bigger.
TR

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #2 on: September 13, 2010, 10:06:11 pm »
hard to tell with the pics try emailing them to yourself and then post them. the crack looks to be in the limb edge ,might try super glue in the crack and binding the problem area. hopefully someone with better ideas will post soon

Offline tgr

  • Member
  • Posts: 92
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #3 on: September 13, 2010, 10:08:41 pm »
It's right on the edge towards the knot.  Very small, but I didn't notice it before I heated the limb.

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #4 on: September 13, 2010, 10:25:35 pm »
try thick rawhide, it will probably work if its not to big. Good luck

Cesar
CESAR

LEGIONNAIRE ARCHERY

Offline tgr

  • Member
  • Posts: 92
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #5 on: September 13, 2010, 11:02:18 pm »
I have some dried out strips of deer hide.  Each are about 3" wide and 2ft long.  I thought I might soften a piece with water and wrap it around with wood glue.  ANy thoughts?
TR

Offline tgr

  • Member
  • Posts: 92
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #6 on: September 13, 2010, 11:22:00 pm »
New Pix

[attachment deleted by admin]

Offline sailordad

  • Member
  • Posts: 5,045
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #7 on: September 13, 2010, 11:52:31 pm »
if it was my bow,and had that knot on the side like that with that big ol hunk sticking out of it
i would put fork in it and call it finished,ive never had much luck with knots let alone trying to fix damage near one
5 weeks to hunting season,plenty of time to make a new
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #8 on: September 14, 2010, 12:38:56 am »
if it was my bow,and had that knot on the side like that with that big ol hunk sticking out of it
i would put fork in it and call it finished,ive never had much luck with knots let alone trying to fix damage near one
5 weeks to hunting season,plenty of time to make a new

I agree with Sailordad.  If it was me.  I would be starting on a new bow.   I wouldn't want to be worrying about it breaking while drawing back on a deer.
I started out with nothin' and I still got most of it left

Offline oogabogachiefwalkingdeer

  • Member
  • Posts: 18
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #9 on: September 14, 2010, 01:14:09 am »
Fill it with super glue and heat with a heat gun and  ahead and use it till you get another one made. It just may last a long long time. Mike Smyth

Offline Parnell

  • Member
  • Posts: 5,556
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #10 on: September 14, 2010, 11:15:56 am »
I'd hang it on a wall and remember the good ole days.  Like what's been said, use the time to build something you can trust.  Especially if you plan to hunt.  If it's all about an ethical shot, I don't think we'd be doing our due diligence to hunt with a compromised tool.  JMO.
Good luck.
1’—>1’

Offline elk country rp

  • Member
  • Posts: 228
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #11 on: September 14, 2010, 01:59:55 pm »
i'm a big fan of the rawhide patch- glued, wrapped, and coated with super glue. not entirely primitive, but definitely functional.

Cacatch

  • Guest
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #12 on: September 14, 2010, 03:08:36 pm »
It's also interesting that your bow is made of beechwood. Is there a reason you chose beech? If you do start a new bow, you could try a stronger wood if you have any available. Beech don't like to bend too many times before he breaks.

CP

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #13 on: September 14, 2010, 03:55:56 pm »
Try wrapping it with some sinew and hide glue if you have it. If not wrap it with some silk fabric set in epoxy and then wrap with art sinew set in epoxy. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline youngbowyer33

  • Member
  • Posts: 606
Re: HELP! Crack in bow 5 weeks before opening day
« Reply #14 on: September 14, 2010, 06:59:20 pm »
I'd sand it a bit, superglue it, then glue on some rawhide.
"All we have to decide is what to do with the time that is given to us"