« previous next »
Pages: [1]

Author Topic: board stave question  (Read 1380 times)

0 Members and 1 Guest are viewing this topic.

Offline walkabout

  • Member
  • Posts: 192
board stave question
« on: September 04, 2010, 01:42:14 pm »
wondering whether or not it matters which side of a quartersawn board one would use for the back of a bow, whether it be the side which the crown of the grain would be the back, or the side which is the inner portion of the rings. hope my explanation isnt too confusing.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: board stave question
« Reply #1 on: September 04, 2010, 01:45:58 pm »
I think I'd do it with the crown as the back although it might not make a difference.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline walkabout

  • Member
  • Posts: 192
Re: board stave question
« Reply #2 on: September 04, 2010, 02:07:44 pm »
thanks, thats usually what i do, but wasnt sure if it mattered.
Logged
Pages: [1]
« previous next »