Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Mollegabet bows??
« previous
next »
Print
Pages: [
1
]
Author
Topic: Mollegabet bows?? (Read 7923 times)
0 Members and 1 Guest are viewing this topic.
Ifrit617
Member
Posts: 1,596
Mollegabet bows??
«
on:
August 31, 2010, 07:53:44 pm »
Hi everybody....
Does anybody know if any of the TBB volumes talk about mollegabet bows or give dimensions for this type of bow?
Also do any of you know of any good build alongs for this bow type?
I have seen many bows of this type on this site and they are all beautiful.
Also do you leave the tips of these bows thick and unbending or do they bend the same amount as the rest of the limb?
Thanks.
Logged
andy thomas
Member
Posts: 142
Re: Mollegabet bows??
«
Reply #1 on:
August 31, 2010, 08:24:09 pm »
if you do a search you will see some but here is one i found with dimensions from half eye i do believe
http://www.primitivearcher.com/smf/index.php/topic,20092.0.html
Logged
jeff halfrack
Member
Posts: 116
Re: Mollegabet bows??
«
Reply #2 on:
August 31, 2010, 08:27:01 pm »
I would also like to know more about the dimensions of these bow,,,, I love the new bow that gothmog just posted!!! that is what I would like to try, so thanks for any help Jeff W
Logged
RyanY
Member
Posts: 1,999
Re: Mollegabet bows??
«
Reply #3 on:
August 31, 2010, 09:00:32 pm »
The TBB talk a little about this design although I don't think it is referred to as mollegabet. With this design inner limbs are left wide so more wood is available to do the work that the nonbending portion of the limb would normally do. By keeping the tips stiff they act more as levers than a regular limb which both increases cast and decreases stacking. Perhaps the greatest advantage of this design is that while the tips are kept stiff, they can also be made extremely thin in width (meaning depth will have to be greater to keep from bending) which decreases mass and allows for greater cast. If the tips are not kept thin (IMHO should be less than 3/8") then the bow will shoot just as any other. Also because of the sudden transition at mid limb from wide to thin, if not kept in check mass can build up there as well.
Logged
adb
Member
Posts: 5,339
Re: Mollegabet bows??
«
Reply #4 on:
August 31, 2010, 10:37:39 pm »
I did a build along on a Holmie in the how to section, maybe check it out if you're interested. Cheers.
Logged
n2huntn
Member
Posts: 468
jeff_smith13@hotmail.com ROLL TIDE !
Re: Mollegabet bows??
«
Reply #5 on:
September 04, 2010, 02:19:11 am »
I have built a few and love the design, especially in a short bow which I use in my blind. Half Eye is the man to talk to for this type of bow.
Jeff
Logged
Genesis 27: 3
elk country rp
Member
Posts: 228
Re: Mollegabet bows??
«
Reply #6 on:
September 04, 2010, 02:36:32 am »
http://www.primitivearcher.com/smf/index.php/topic,17521.0.html
i think this will help
Logged
finnfoto
Member
Posts: 14
Shoot straight and have fun.
Re: Mollegabet bows??
«
Reply #7 on:
September 04, 2010, 07:37:29 am »
Check out the one listed on ebay. type in ancient bows. . Mr. mears has a beautiful reproduction on there.
Logged
Sam Wagaman
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Mollegabet bows??