« previous next »
Pages: [1]

Author Topic: 1/2" ash MR arrows  (Read 7662 times)

0 Members and 1 Guest are viewing this topic.

Offline Kviljo

  • Member
  • Posts: 488
  • Archaeologist, Antitheist
1/2" ash MR arrows
« on: August 10, 2010, 06:16:26 pm »
Ash shafts, 1/2" bodkins from Diy Archery, horn-reinforcements in the nocks. 1/2" thick below the shoulder of the point, and 3/8" thick at the nock. From 74 to 82 grams. These are as solid as wood arrows can be!


Just thought I'd share some photos.








Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: 1/2" ash MR arrows
« Reply #1 on: August 10, 2010, 06:20:15 pm »
That's a beautiful set of arrows man.  :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Cromm

  • Member
  • Posts: 1,065
Re: 1/2" ash MR arrows
« Reply #2 on: August 10, 2010, 06:20:37 pm »
Nice. You may want to round off the nocks so they don't cut into your string.
Logged
Great Britain.
Home of the Longbowman.

Offline RyanY

  • Member
  • Posts: 1,999
Re: 1/2" ash MR arrows
« Reply #3 on: August 10, 2010, 07:20:00 pm »
I love everything you make. Those are some beautiful arrows.
Logged

Offline colejack3

  • Member
  • Posts: 47
Re: 1/2" ash MR arrows
« Reply #4 on: August 10, 2010, 07:36:33 pm »
Awsome job
Logged

Offline aero86

  • Member
  • Posts: 1,263
Re: 1/2" ash MR arrows
« Reply #5 on: September 02, 2010, 05:19:23 pm »
wow... good job!  could you imagine thousands of those coming down every couple seconds...
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.
Pages: [1]
« previous next »