« previous next »
Pages: 1 [2]

Author Topic: Ipe ??  (Read 4300 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Ipe ??
« Reply #15 on: August 09, 2010, 12:53:34 am »
The first hickory/ipe bow I built was 1 3/4" wide at the fades and 62" long. By the time it was tillered the ipe belly was thinner than the 1/8" hickory backing and it pulled over 50#. You could easily build a 60# bow with a 3/4" wide slat of ipe backed with hickory or boo. At 1 1/4" you have room to dress up the edges!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Ipe ??
« Reply #16 on: August 09, 2010, 01:04:10 am »
Thank you all for your replys, you have all been more than helpfull
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: Ipe ??
« Reply #17 on: August 09, 2010, 03:10:57 pm »
You can also use a wet rag and wipe the Ipe with it and it will bring the grain out most of the time.. If you are going to pull it into R/D then the more you put in the better your grain will need to be..
Logged
Pages: 1 [2]
« previous next »