« previous next »
Pages: [1]

Author Topic: Tiller check Elm  (Read 2593 times)

0 Members and 1 Guest are viewing this topic.

Offline TBod

  • Member
  • Posts: 275
Tiller check Elm
« on: August 01, 2010, 06:33:47 am »
Hi!

I think it's something weird about the bottom limb, left in the pics. It's about 1,5 oz heavier than the top (if I figured it out correctly..). Somehow it needs to be that much heavier (or thicker). It had a big deflex spot 3" from the fades, I took out some of it with heat. Otherwise the side profile is the way the stave grew, or dried.

The heartwood of the stave was sick or rotten in some way, maybe that Elm disease. It's Wych Elm.

It's about 2,5 oz heavy on the Mass principle




[attachment deleted by admin]
« Last Edit: August 01, 2010, 06:44:44 am by TBod »
Logged

Offline Dean Marlow

  • Member
  • Posts: 531
Re: Tiller check Elm
« Reply #1 on: August 01, 2010, 08:18:19 am »
Tbod your full draw looks pretty darn good to me. My opinion is it might be just a little stiff right out of the fades on the right limb. But it looks like your handle area is set in a little so it may be o.k. Dean
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Tiller check Elm
« Reply #2 on: August 01, 2010, 09:57:18 am »
Full draw shot looks great, the previous pic looked a bit like it was working a bit hard near the handle on the left limb. If you look just above the board, where the black background suddenly becomes the green of a bush, just below that point.
But like I said looks great on the full draw. Sometimes features of the stave can confuse the picture.
Nice looking bow.
Del
PS
I just had another look at the stave, in the top pic, and yeah, I think there's a natural dip there.
I think you've got it nailed!
« Last Edit: August 01, 2010, 10:01:56 am by Del the cat »
Logged
Health warning, these posts may contain traces of nut.

Offline TBod

  • Member
  • Posts: 275
Re: Tiller check Elm
« Reply #3 on: August 01, 2010, 12:17:56 pm »
Dean Thanks! Yeah it has about 0,5" set back in the handle, also the handle bends a tiny little bit.

Del Thanks! Yeah it has natural dip or deflex spot there which I flattened out some, but not all.

What confuses me is the thickness that the left limb needs to have not to bee weaker then the right. I might be imaging but it feels like the top and bottom limb have different wood qualites. Like the top is Elm and the bottom is Birch or something..

The mystery of wood, I love it! :D
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tiller check Elm
« Reply #4 on: August 01, 2010, 02:58:54 pm »
Very nice tiller on that. Nicely done. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Tiller check Elm
« Reply #5 on: August 01, 2010, 03:04:22 pm »
                                                      I think it looks just fine....the Full Draw Shot looks nice ....I would leave it...and enjoy it....Nice Bow..... ;)
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline TBod

  • Member
  • Posts: 275
Re: Tiller check Elm
« Reply #6 on: August 01, 2010, 07:18:15 pm »
Jawge and El D Thanks!

I will consider it done and start with the next, yeah!
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Tiller check Elm
« Reply #7 on: August 01, 2010, 08:36:30 pm »
Looks good to me also
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline TBod

  • Member
  • Posts: 275
Re: Tiller check Elm
« Reply #8 on: August 02, 2010, 04:21:45 am »
Thanks Marc, alright!
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Tiller check Elm
« Reply #9 on: August 02, 2010, 08:00:04 am »
Looks good to me a full draw and that is all that really matters.Nice work. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline TBod

  • Member
  • Posts: 275
Re: Tiller check Elm
« Reply #10 on: August 02, 2010, 04:13:17 pm »
Thanks Pappy!

I'm totally convinced it's ok now since all you "heavy" dudes said so  :D
Logged

Offline tombo

  • Member
  • Posts: 117
Re: Tiller check Elm
« Reply #11 on: August 02, 2010, 07:18:44 pm »
TBod, don't over-think it too much........
Logged
Pages: [1]
« previous next »