Author Topic: Elm RD Bow (not for BOM)  (Read 7680 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Elm RD Bow (not for BOM)
« on: August 01, 2010, 10:34:52 am »
I made this bow for an aboriginal woman that lives in a neighbouring city.  She wants to hunt Deer, from her back porch  :), and even though her friends tried to talk her into a wheel bow she wanted to hunt with wood.  I wanted to make her something that had good handling characteristics and good performance.  I was initially going to make her a recurve, she liked the looks of them at an event I where I had a display.  I decided to make her an RD bow instead because they are easier to brace and more user friendly.  The bow is 60" long with 1 1/2" wide limbs and pulls 42# @ 26".  Here's some pictures.





Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline sailordad

  • Member
  • Posts: 5,045
Re: Elm RD Bow (not for BOM)
« Reply #1 on: August 01, 2010, 10:38:06 am »
Marc,i have always admired your work
but for some reason this simple little bow speaks voulmes to me
very very nice bow and incredible craftsmanship as always

of all the bows of yors i have seen on this site,for some odd reason this one is my fav so far
simple, yet elegant
what lady could ask for more
once again
very nice bow
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline profsaffel

  • Member
  • Posts: 420
Re: Elm RD Bow (not for BOM)
« Reply #2 on: August 01, 2010, 11:05:44 am »
Nice bow Marc.

I can appreciate the major bowyers on here for at least one thing that they contribute. Besides all your contributions to the PA community, its this style bow that you are the master of no doubt.
Professor of History, Student of Bowyery

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Elm RD Bow (not for BOM)
« Reply #3 on: August 01, 2010, 11:17:45 am »
V clean, simple, and pretty. I like the sculptural lines of the handle.
Del
Health warning, these posts may contain traces of nut.

Offline RyanY

  • Member
  • Posts: 1,999
Re: Elm RD Bow (not for BOM)
« Reply #4 on: August 01, 2010, 11:18:52 am »
Ditto. I'm hoping to make one like this in my future. Hopefully it will turn out half as good. Great job.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Elm RD Bow (not for BOM)
« Reply #5 on: August 01, 2010, 11:24:13 am »
Thanks guys
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Dean Marlow

  • Member
  • Posts: 531
Re: Elm RD Bow (not for BOM)
« Reply #6 on: August 01, 2010, 11:44:58 am »
Marc very nice bow you have there. The lady you built it for will be all smiles. Dean

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Elm RD Bow (not for BOM)
« Reply #7 on: August 01, 2010, 11:57:32 am »
Very nice Marc!   :)  I am always amazed at the amount of reflex you are able to keep when you construct one of your bows... How much did this one start with and end up keeping? 
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Barrage

  • Member
  • Posts: 414
Re: Elm RD Bow (not for BOM)
« Reply #8 on: August 01, 2010, 12:03:33 pm »
Nice bow Marc.
Travis

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Elm RD Bow (not for BOM)
« Reply #9 on: August 01, 2010, 12:24:33 pm »
Nice looking bow Marc, I'm sure she will be happy with it. What kind of wood are the tip overlays?
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Elm RD Bow (not for BOM)
« Reply #10 on: August 01, 2010, 12:50:10 pm »
Nice bow, Marc and beautiful full draw curves.  8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Elm RD Bow (not for BOM)
« Reply #11 on: August 01, 2010, 01:26:48 pm »
I think it started with 4" of reflex and kept about 2"

The handle has a lam of Bloodwood to finish and the overlays are also Bloodwood, in the hopes she draws blood with the bow.  The string is also red FF.  I put a leather shelf on the bow and a white leather wrap to finish it up.  I made her 3 target arrows and 3 hunting arrows to go with the bow, she's already lost 1 of the target arrows  :)
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Elm RD Bow (not for BOM)
« Reply #12 on: August 01, 2010, 02:57:43 pm »
It's a beauty, Marc and well done. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Gordon

  • Member
  • Posts: 3,299
Re: Elm RD Bow (not for BOM)
« Reply #13 on: August 01, 2010, 02:58:17 pm »
That's a sweet bow Marc. I don't normally care for cut-in shelves, but I really like the way you did it.
Gordon

Offline Jesse

  • Member
  • Posts: 2,129
Re: Elm RD Bow (not for BOM)
« Reply #14 on: August 01, 2010, 03:06:10 pm »
very nice.  :)
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark