« previous next »
Pages: 1 [2]

Author Topic: What shafts for my bow?  (Read 3878 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: What shafts for my bow?
« Reply #15 on: August 05, 2010, 03:51:43 pm »
Quote from: Justin Snyder on August 03, 2010, 02:10:58 am
John, I guess I just dislike putting points on and pulling them off. It takes me to long to get them straight the first time.  ;D

I can understand that, Justin, I surely can.  I am saddled with a Tru-Center tapering tool that is surely demon possessed.  It will NOT center the taper no matter what you do.  I have better luck using my 4 in hand Nicholson rasp and my eye for judgement.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: What shafts for my bow?
« Reply #16 on: August 05, 2010, 04:51:53 pm »
I have the twin to your taper tool, it just plain sucks. I dreaded making arrows before I made my own taper tool. Here is a link to the post  http://www.primitivearcher.com/smf/index.php/topic,17608.0.html
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: What shafts for my bow?
« Reply #17 on: August 05, 2010, 06:30:32 pm »
I built the same set up for myself, except I used a $3000 Shopsmith...until the spindle locked up on it.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: 1 [2]
« previous next »