Author Topic: Last stave of gauva, some pics of getting started  (Read 6420 times)

0 Members and 1 Guest are viewing this topic.

Offline youngbowyer33

  • Member
  • Posts: 606
Re: Last stave of gauva, some pics of getting started
« Reply #30 on: August 04, 2010, 01:07:14 pm »
can't wait
"All we have to decide is what to do with the time that is given to us"

Offline denny

  • Member
  • Posts: 304
    • my site
Re: Last stave of gauva, some pics of getting started
« Reply #31 on: August 04, 2010, 07:17:42 pm »
Looks a lot better paka. Yes lower limb should be a little stiffer. Denny

Paka

  • Guest
Re: Last stave of gauva, some pics of getting started
« Reply #32 on: August 05, 2010, 08:01:55 am »
Well unfortunetly I think the lower limb is now weaker than th top limb , I took off just a little to much wood. I tell you what though , it sure shoots good.  Will try to get the full draw pics taken soon . Gonna take it Friday to find some pigs  ;)

Paka

  • Guest
Re: Last stave of gauva, some pics of getting started
« Reply #33 on: August 06, 2010, 06:42:02 am »
Got to shoot it today at 20 yards and she does her job well. Was a blast. Heres the full draw pic , little uncomfortable in a small room but untill I can get outside it"ll do .  I guess I took to much out of the bottom  midlimb and not enough from top tip. Thats the complete opposite of where the bow was arlier on in this build ??? ;D . So its funky and I cant wait to build another and keep working on tillering , but if it puts meat on the table that will be unreal . Enjoy Paka
  P.S. Thank"s Everone for all your help , Mahalo Nui Loa

[attachment deleted by admin]

Offline walkabout

  • Member
  • Posts: 192
Re: Last stave of gauva, some pics of getting started
« Reply #34 on: August 06, 2010, 06:49:42 pm »
you could always tiller it lighter and back to positive tiller and then glue on a thin lamination to the belly.