« previous next »
Pages: [1]

Author Topic: Ground Boa  (Read 5192 times)

0 Members and 1 Guest are viewing this topic.

Offline NTD

  • Member
  • Posts: 1,771
Ground Boa
« on: July 17, 2010, 08:52:32 pm »
I have for trade a 55" Solomon Island Ground Boa.  It is 3" wide at it's narrowest.  So you could cut this in half length wise and back two 55" bows, if you liked.  Will consider any offers but am specifically looking for Hickory backing strips, Osage lumber, Straightened Tonkin Cane 55-65# spine 31" long, Ipe blanks, I could use a nice leather arm guard or two.... Or a 14" bandsaw, I'll pay shipping ;D >:D or whatever you might have that I didn't know I needed.





Logged
Nate Danforth

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: Ground Boa
« Reply #1 on: July 17, 2010, 11:21:04 pm »
if ya dont get a response i have acces to hickory and ipe,  and can cut backin strips and ipe blanks
Logged

Offline gothmog

  • Member
  • Posts: 176
Re: Ground Boa
« Reply #2 on: July 18, 2010, 12:10:13 pm »
Man, I wish I had seen this before I made the offer on the others.  That is beautiful.  Your quivers gets its finishing touches today.  I did make a leather armguard/sleeve compressor a while back.  Nothing special, but it works.
Logged

Offline hammertime

  • Member
  • Posts: 763
  • no shoes no shirt, no problems
Re: Ground Boa
« Reply #3 on: July 20, 2010, 07:22:58 pm »
I have a 45# elm self bow ...If your interested...Hammertime
Logged

Offline NTD

  • Member
  • Posts: 1,771
Re: Ground Boa
« Reply #4 on: July 21, 2010, 12:00:49 am »
Thanks for the offer Hammertime but a trade is in progress
Logged
Nate Danforth
Pages: [1]
« previous next »