Main Discussion Area > Arrows

Trouble with arrows

<< < (5/5)

Pat B:
I know this is confusing but the uprights are set at 26" and a 28" arrow is the AMO (Archery Manufactorers Organization) standard. So what you will need to do is start with at least 28" shaft and after spine testing it cut it to your length...just remember to add 5# for each inch removed from the 28" shaft.
   I draw 26" but cut my arrows to 29" so I can subtract 5# for the inch over 28". Pat

1/2primitive:
So, the arrows have to spine about 15# lighter than the reading before I cut them down?
        Sean

Navigation

[0] Message Index

[*] Previous page