Main Discussion Area > Arrows

Trouble with arrows

<< < (3/5) > >>

DanaM:
This is the one I built
http://www.jamesmhill.com/Spine_Tester.html

DanaM

Pat B:
Thats like the one I made Dana. It seems to be the most accurate.
Sean, I have some Bambusa cane that is too small for most but with your short draw length it should work fine. I'll try to get it out to you soon.    Pat

DanaM:
it is a bit of a pain to get everything lined up, but keep tinkering and it gets there.
very generous Pat I'm sre Sean will put em to good use.

DanaM

1/2primitive:
Thanks a lot Pat, I will put them to good use. Along with the sourwood. You're a great guy.
Dana, if I build one of those, I need something to compare it against. I don't have any arrows that I know the spine of, as I said before; I'm just guessing. Where did you get your dial Dana, or Pat? So that I can use the measurements of your's to get it right.
edit; Dana, what dial from Harbor freight was it?
      Sean

DanaM:
I bought this one Sean
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=33675

You don't need to compare it to other arrows, print off the spine chart measured by deflection fer instance .650" = 40 lbs

I hope its ok to post non advertises website, don't wanna git in trouble

DanaM

Navigation

[0] Message Index

[#] Next page

[*] Previous page