« previous next »
Pages: [1]

Author Topic: smelting copper?  (Read 1712 times)

0 Members and 1 Guest are viewing this topic.

Offline paulc

  • Member
  • Posts: 660
smelting copper?
« on: July 06, 2010, 09:14:11 am »
Wikipedia says copper won't melt till about 2000 degrees...anyone know how to reach that temp without a whole lot of electricity?  I pulled the motor out of a crapped out dryer the other day and thought I might try to smelt my own copper bopper...Call me crazy?  Or can it be done in a backyard?  Any ideas?  thanks, Paul C
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: smelting copper?
« Reply #1 on: July 06, 2010, 09:55:25 am »
 How hot does an Oxy/ Acetalene torch get?
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: smelting copper?
« Reply #2 on: July 06, 2010, 10:09:22 am »
You can do it with a oxy/acetylene torch,I have done that several times. The key is to keep it all hot and let it cool all at ones or you will have layers in the copper.  :)   
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline cracker

  • Member
  • Posts: 3,123
Re: smelting copper?
« Reply #3 on: July 06, 2010, 10:09:50 am »
It should get plenty hot having a crucible to stand the heat may be the trick.Ron
Logged
If we can't help each other what is the point of being here?

Offline bryan irwin

  • Member
  • Posts: 671
Re: smelting copper?
« Reply #4 on: July 07, 2010, 08:07:19 pm »
Go to lowes or home depot in the plumbing dept. and get some copper stub outs and fill them with lead they have them from 1/2 to 3/4" i made two that works great.
Logged
bryan irwin
Pages: [1]
« previous next »