« previous next »
Pages: [1] 2

Author Topic: Sitka Spruce strip canoe  (Read 7899 times)

0 Members and 1 Guest are viewing this topic.

Offline John K

  • Member
  • Posts: 1,936
Sitka Spruce strip canoe
« on: June 28, 2010, 01:19:37 pm »
Anybody out there ever built a strip canoe  ???

I'm going to give it a try  ;D
Logged
The only way to fail is to never start !

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Sitka Spruce strip canoe
« Reply #1 on: June 28, 2010, 02:02:57 pm »
 I am refinishing an old canoe right now, it's FG though... not as cool a project as yours... I would really like to see pics of your progress Good luck!   :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #2 on: June 28, 2010, 02:26:55 pm »
Josh, I'm going to document the process, first i need to get all my supplies and a strongback and Moulds made, i'm going to go with a 16' Chestnut Prospecter as the design. I was warned by a friend of my Dads that you just can't build one, where have i heard this before  ::)  :D   Wish me luck !
Logged
The only way to fail is to never start !

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Sitka Spruce strip canoe
« Reply #3 on: June 28, 2010, 02:44:12 pm »
Never built a canoe.
However, I am reading a book on the subject.  Canoecraft.
If I had a place to build one...  I suspect that I would have to give it a try.
Please take lots of photos.

David
Logged
David Key / N.W. Alabama

Offline aaron

  • Member
  • Posts: 1,037
Re: Sitka Spruce strip canoe
« Reply #4 on: June 28, 2010, 10:51:17 pm »
have ya got the wood yet? if not, i have some rough sawn sitka......
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline JW_Halverson

  • Member
  • Posts: 11,925
Re: Sitka Spruce strip canoe
« Reply #5 on: June 28, 2010, 10:54:27 pm »
There are a number of good books on the subject of cedar strip canoes.  I have read several of them and know two guys that made several of them.  It can be done. 

In fact the two books I had read were fairly easy to understand and rather in depth to the subject.  From what I can tell the fiberglass shell to seal the wood is the hard part. 

Post pics as you go!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #6 on: June 29, 2010, 11:16:19 am »
aaron, Washington is a little far for me, i'm in Wiscosin, but thanks for the offer !

JW i'm lucky enough to have a friend of my Dads thats built about 6 of them , so he set me up with some books and i can always pick his brain when i have questions  :)

I'm going to try and post pics as i go along, it's going to be a long process thou .
Logged
The only way to fail is to never start !

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #7 on: June 30, 2010, 01:27:07 pm »
First thing i need to do is  get my plans from the book to full size on graph paper. You only make half the pattern and flip the pattern over for the other half.

[attachment deleted by admin]
Logged
The only way to fail is to never start !

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #8 on: June 30, 2010, 01:28:17 pm »
The graph paper

[attachment deleted by admin]
Logged
The only way to fail is to never start !

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #9 on: June 30, 2010, 01:29:12 pm »
Getting there. More to come  :)

[attachment deleted by admin]
Logged
The only way to fail is to never start !

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Sitka Spruce strip canoe
« Reply #10 on: June 30, 2010, 01:53:09 pm »
That is the exact same book I am reading.
Just got to the part where the strongback is built.

Keep the photos comming.  This is going to be fun to watch.

David
Logged
David Key / N.W. Alabama

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #11 on: June 30, 2010, 02:07:10 pm »
Very informative book isn't  it David ?  i heard to stay away from the Hiawatha design.
Logged
The only way to fail is to never start !

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Sitka Spruce strip canoe
« Reply #12 on: June 30, 2010, 05:03:54 pm »
Yes, that book is infomative.

Use dry lumber in that strongback.  Dont want it warping into an "S" curve. :D

What kind of tools are you going to be using?

David
Logged
David Key / N.W. Alabama

Offline John K

  • Member
  • Posts: 1,936
Re: Sitka Spruce strip canoe
« Reply #13 on: June 30, 2010, 05:56:57 pm »



What kind of tools are you going to be using?

David
[/quote]

To many to list  :D
Logged
The only way to fail is to never start !

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Sitka Spruce strip canoe
« Reply #14 on: June 30, 2010, 06:34:05 pm »
10-4. 
I have read the book.
Should of known the answere to that. ;D

David
Logged
David Key / N.W. Alabama
Pages: [1] 2
« previous next »