« previous next »
Pages: 1 [2]

Author Topic: Inserts For Self-nocks??  (Read 12799 times)

0 Members and 1 Guest are viewing this topic.

Offline bobnewboy

  • Member
  • Posts: 329
  • https://www.flickr.com/photos/bob_d14/
    • The Company of Sixty Field Archers
Re: Inserts For Self-nocks??
« Reply #15 on: June 29, 2010, 09:45:54 am »
Quote from: mox1968 on June 17, 2010, 08:46:30 pm
was wondering how do you cut the horn when making slivers for nocks,bandsaw,hacksaw????

Table top bandsaw for me.  Fine toothed blade.  Works perfectly.
Logged
"The Englishman takes great pride in his liberty. He values this gift more than all the joys of life, and would sacrifice everything to retain it. The populace would have you understand there is no country in the world where such perfect freedom can be enjoyed, as in England!" Frenchman, London 1719

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Inserts For Self-nocks??
« Reply #16 on: June 30, 2010, 11:26:03 am »
I clamp the shaft in my wood vice-straight up and vertical. Then I use a handsaw. Usually I use a hacksaw to make a pilot cut then use a 2 or 3 blades clamped together depending on the width of the insert. BTW sometimes I leave a bit of insert "proud" as an index. Sometimes I don't. :) Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: 1 [2]
« previous next »