Author Topic: A bit more than an arrow  (Read 4665 times)

0 Members and 1 Guest are viewing this topic.

Offline Tsalagi

  • Member
  • Posts: 540
  • Just a bowman...
    • Guerilla Chef Headquarters
Re: A bit more than an arrow
« Reply #15 on: July 06, 2010, 02:43:55 am »
Hey, doesn't Dane have a Roman ballista that could launch that?  >:D

Outstanding craftsmanship, Marc! Me like!!!!!
Living a dream...

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: A bit more than an arrow
« Reply #16 on: July 06, 2010, 08:19:06 am »
It'll work just fine Marc, you just need to make a slightly bigger bow. ;D Cool spear!
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Tom Leemans

  • Member
  • Posts: 524
Re: A bit more than an arrow
« Reply #17 on: July 07, 2010, 01:24:23 pm »
Awesome Marc!

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: A bit more than an arrow
« Reply #18 on: July 07, 2010, 03:12:10 pm »
Thanks guys

Much of the work on this spear was done with stone tools and all natural materials were used.  The notch for the point was made using modern tools but besides that everything else was done by hand.  The shaping of the spear was done with stone and the point was tied on with Moose backstrap sinew.  It has 1 Eagle feather, I only had the one, and the other is Wild Turkey that Glenn Doane sent me a few years ago.  The 2 feathers on the end were from a Pigeon who was too stupid to stay away when I took it in my mind to thin the local flock a couple years ago.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com