« previous next »
Pages: [1]

Author Topic: URAC Full Strength  (Read 1149 times)

0 Members and 1 Guest are viewing this topic.

PeteDavis

  • Guest
URAC Full Strength
« on: June 11, 2010, 12:54:35 am »


I just glued on a handle section with URAC 185. It's been warm here, 80 by day. If I leave this bow in the sun tomorrow, can I shape and shoot it tomorrow evening or is there a waiting period with URAC 195?

PD
Logged

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: URAC Full Strength
« Reply #1 on: June 11, 2010, 12:59:49 am »
Pete, at the right temp, only an hour or two. I usually give it at least 24 hours after glue up before stressing it. I use a hot box at about 100 deg and generally Urac is hard in 2 hours. Then I let it cool down slowly.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »