« previous next »
Pages: [1]

Author Topic: is there any interest?  (Read 7702 times)

0 Members and 1 Guest are viewing this topic.

Offline Wolfsongforge

  • Member
  • Posts: 53
  • My name is Kenneth, and I am a bladesmith
is there any interest?
« on: June 02, 2010, 03:20:53 pm »
I took pictures as i remade my propane forge. I know it is not primitive or anything but it is what I use( gave up coal years ago), but if there is any one interested i will post the pictures and do a how to  build. If not there is not need to waste bandwith here on the forums.

God Bless
Kenneth
Logged

Offline Barrage

  • Member
  • Posts: 414
Re: is there any interest?
« Reply #1 on: June 02, 2010, 03:55:39 pm »
yes.
Logged
Travis

Offline n2everythg

  • Member
  • Posts: 792
Re: is there any interest?
« Reply #2 on: June 02, 2010, 04:38:14 pm »
yes, yes yes
Logged
N2
East Coast of Nowhere

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: is there any interest?
« Reply #3 on: June 02, 2010, 05:57:56 pm »
very interested!!
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: is there any interest?
« Reply #4 on: June 02, 2010, 06:00:37 pm »
Nah..I don't care...
Just kidding.
Yes!
Logged
Frank from Germany...

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
Re: is there any interest?
« Reply #5 on: June 02, 2010, 06:00:50 pm »
Very interested as I am needing to build a new one.
Mark
Logged
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: is there any interest?
« Reply #6 on: June 02, 2010, 07:24:28 pm »
You mean a propane forge that could be modified to heat treat rock? Why would anyone want such a thing.  ;)
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline ksbowhunter

  • Member
  • Posts: 16
Re: is there any interest?
« Reply #7 on: June 02, 2010, 09:56:52 pm »
I am fairly new on PA. I am currently working on getting all the parts to make a propane forge and I would love to see pictures and a build along!
Logged

hipong

  • Guest
Re: is there any interest?
« Reply #8 on: June 06, 2010, 02:07:46 am »
 ;) yeaaa
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: is there any interest?
« Reply #9 on: June 06, 2010, 09:28:17 am »
I wouldn't mind seeing that.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline aznboi3644

  • Member
  • Posts: 802
Re: is there any interest?
« Reply #10 on: June 08, 2010, 10:26:48 pm »
I wanna see this.

I've had thoughts about a coal forge.  I filled up a charcoal starter 3/4 way up and after all the charcoal got hot the starter looked like a turbine.  I put the metal grate on top of it to cook a personal burger and after a little while the metal grate started to turn cherry red and started to sag so I pulled it off...that is what started my thinking.

How hot does a forge need to get?
Logged

Offline Genghis

  • Member
  • Posts: 6
Re: is there any interest?
« Reply #11 on: December 12, 2010, 06:11:29 am »
Quote from: aznboi3644 on June 08, 2010, 10:26:48 pm
How hot does a forge need to get?

...depends which type of metal you want to melt  ;D
Logged
Pages: [1]
« previous next »