« previous next »
Pages: [1]

Author Topic: Finishing and staining a rattan bow  (Read 4834 times)

0 Members and 1 Guest are viewing this topic.

Offline yod9

  • Member
  • Posts: 16
Finishing and staining a rattan bow
« on: June 12, 2015, 12:32:41 pm »
i just purchased an unfinished rattan horsebow.  i am looking to stain it,
what is the best option?
thanks!
Steve
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Finishing and staining a rattan bow
« Reply #1 on: June 12, 2015, 01:29:09 pm »
Any stain you chose will stain it just fine. The longer you leave the stain on before wiping git back off the more rich it will be. Keep it simple and use a rattle can of Helmsman to seal it. 2-3 coats is plenty. You don't have to sand between coats. Apply one every 2-3 hours.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Finishing and staining a rattan bow
« Reply #2 on: June 12, 2015, 04:05:12 pm »
What Pearlie said.   Rattan is pretty porous so keep that in mind while you are staining it or it will come out real dark. 
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Finishing and staining a rattan bow
« Reply #3 on: June 18, 2015, 12:09:56 am »
I've had better luck with dye instead of stain on bows.
Logged
I started out with nothin' and I still got most of it left
Pages: [1]
« previous next »