Author Topic: bored need to work on bow  (Read 1419 times)

0 Members and 1 Guest are viewing this topic.

Offline bubba pharris

  • Member
  • Posts: 23
bored need to work on bow
« on: May 07, 2010, 10:16:02 pm »
i have a nice peice of osage i cut in January...cut down to about 3x3x72 inchs...its been drying inside the house with central heat and air ...is it to soon to start???

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: bored need to work on bow
« Reply #1 on: May 07, 2010, 10:28:00 pm »
In general, no.  Osage requires a long, long time to cure.  Most suggest a generic time period of 12~18 months.  However, this can vary.  I cut a 5" tree in November after all the sap had fallen.  I split it into quarters and left it to hang in the garage with plenty of heat.  It's ready to start roughing out a bow now, but still not quite ready to make a finished product.
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: bored need to work on bow
« Reply #2 on: May 08, 2010, 04:40:27 am »
You are fine to be roughing it out, but don't heavy tillering, (keep the tips sealed too)
Del
Health warning, these posts may contain traces of nut.

Offline acker

  • Member
  • Posts: 221
Re: bored need to work on bow
« Reply #3 on: May 08, 2010, 05:24:53 am »
You need only a few things :



+ a hygrometer and you'll have to messure the room temperature and the weight of the wood as well.

Or get your self a cheap wood moisture meter.

Where ever you dry your stave's you need to place a hygrometer , in the bowyers bible is a good chapter about how to dry wood.

acker
« Last Edit: May 08, 2010, 05:34:51 am by acker »