« previous next »
Pages: 1 [2]

Author Topic: hickory board in progress  (Read 2644 times)

0 Members and 1 Guest are viewing this topic.

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: hickory board in progress
« Reply #15 on: May 07, 2010, 06:31:27 pm »
Trey...should have them there also....they sell files and rasps....bet they have them..
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: hickory board in progress
« Reply #16 on: May 09, 2010, 12:18:26 am »
been workin on it more. it was comeing along nicely untill i somehow managed to scrape a darn hinge in one of the limbs. by the time i got it all straightened back out i think it might be a little light, not sure if im going to keep workin on it or just shorten it, lighten it, and give it to my future little step brother. waiting on mr. kieth's advice, lol. here are some pics.


marked the "DO NOT TOUCH" hingeing part with sharpie


here it is beding a little bit after i got it streightend out. still not perfect, but this is where it is right now.
Logged
lets just shoot it

Offline bubby

  • Member
  • Posts: 11,054
Re: hickory board in progress
« Reply #17 on: May 09, 2010, 03:20:25 am »
it's bending enough it should go to a shorter string, at least 2" or 3" brace height
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 [2]
« previous next »