« previous next »
Pages: [1]

Author Topic: Bow forms  (Read 5514 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Bow forms
« on: April 24, 2010, 10:45:34 pm »
I want to start doing some serious wood bending and was wondering if you guys could show some pictures of what your forms look like.  I will be making self bows, hopefully some R/D, and recurve tips.  I have a bunch of 2x8's that I hope will work.  Thanks for the help.
Logged
I started out with nothin' and I still got most of it left

Offline Jesse

  • Member
  • Posts: 2,129
Re: Bow forms
« Reply #1 on: April 25, 2010, 12:26:33 am »
Here is one of mine :) 
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Bow forms
« Reply #2 on: April 25, 2010, 01:10:30 am »
Mine are pretty simple...2x4 or 2x6 with the shape cut out. I use a heat gun w/ veg oil for osage bending.





Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Bow forms
« Reply #3 on: April 25, 2010, 01:22:47 am »
I used Veg. oil while straightening the bow I am finishing up.  I didn't degrease good enough and the entire sinew back peeled off.  I might try steam next time.  Thanks for the pictures.
Logged
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Bow forms
« Reply #4 on: April 25, 2010, 10:04:57 am »
If your stave is dry osage, seal the back and ends with shellac before steaming. This will prevent excess moisture from getting in and checking the wood as it dries. The shellac can take the heat and moisture of steaming without problems.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Jake Levi

  • Guest
Re: Bow forms
« Reply #5 on: April 25, 2010, 10:16:05 am »

Good thread, thanks, I have been thinking of a form, til now have just used a board with blocs on it and clamping the stave down over the blocks, I am wanting to recurve some osage.

Most of my bows in the forseeable future are going to be 48" to 58". I want them to have a moderate recurve. Then most will get sinewed.
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Bow forms
« Reply #6 on: April 25, 2010, 11:34:53 am »
I have a couple cauls like Pat's to reflex and untwist staves. If I'm glueing something up, I just use wooden blocks-I usually make selfbows and haven't made enough laminated bows in the past to fool with building an elaborate form.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Bow forms
« Reply #7 on: April 25, 2010, 09:08:00 pm »
The forms that I would like to make won't be anything fancy either.  I have some lumber and C-clamps to use.

Thanks for the steaming tip Pat.  Any idea how long to steam before bending?
Logged
I started out with nothin' and I still got most of it left

Offline yazoo

  • Member
  • Posts: 485
Re: Bow forms
« Reply #8 on: April 25, 2010, 10:12:50 pm »
Logged
if you can shoot over them , they ain't to far

Offline yazoo

  • Member
  • Posts: 485
Re: Bow forms
« Reply #9 on: April 25, 2010, 10:21:42 pm »
this is the type of form I use straightens and reflexes at the same time  mike
Logged
if you can shoot over them , they ain't to far

Offline denny

  • Member
  • Posts: 304
    • my site
Re: Bow forms
« Reply #10 on: April 26, 2010, 12:13:46 am »
Pat your work shop table looks like mine. denny
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Bow forms
« Reply #11 on: April 26, 2010, 12:48:58 am »
If I cleaned it up I'd never find anything.  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Jake Levi

  • Guest
Re: Bow forms
« Reply #12 on: April 26, 2010, 08:40:18 am »
Good thread, thanks,

I am picking up a 2 by today, 6', will be using blocks with it as I have been, and see how it evolves from there,

would like to see more forms for sure.
Logged
Pages: [1]
« previous next »