« previous next »
Pages: [1]

Author Topic: Re-finishing snakeskin  (Read 1082 times)

0 Members and 1 Guest are viewing this topic.

Offline Postman

  • Member
  • Posts: 1,154
Re-finishing snakeskin
« on: April 18, 2010, 12:41:23 pm »
last year I put several light coats of minwax satin spray poly on an osage  with skins. a couple of spots on the skins are roughed up a bit. Do I just hit it with steel wool lightly, and redo the same, or would tru-oil fill it in better, or tru-oi then poly?
Thanks,
John
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Re-finishing snakeskin
« Reply #1 on: April 18, 2010, 01:30:41 pm »
I would just use more Poly over it after Steel Wooling it...but the True Oil would build it up faster....just need to put enough on to make the Skins lay better...But I have noticed that the Tru Oil stays Softer...so it is more prone to scratching and denting than the Poly is.....so if I was using a Sealer like you ...I would stick to the Poly....JMO
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome
Pages: [1]
« previous next »