« previous next »
Pages: [1]

Author Topic: Shark teeth  (Read 2665 times)

0 Members and 1 Guest are viewing this topic.

Offline John K

  • Member
  • Posts: 1,936
Shark teeth
« on: April 15, 2010, 01:02:47 pm »
Does anyone have any pictures of Shark teeth mounted on an arrow. If so could you please post it  :)

Thanks, John
Logged
The only way to fail is to never start !

Offline Keenan

  • Member
  • Posts: 4,824
Re: Shark teeth
« Reply #1 on: April 16, 2010, 03:15:22 pm »
 I have one that I made years ago to try it out, I'll see if I can find it and get you a pic. It seems tough enough and mounted fine however was a little to light so i had to add some weight to the tip of the arrow.
Logged

Offline John K

  • Member
  • Posts: 1,936
Re: Shark teeth
« Reply #2 on: April 16, 2010, 03:49:08 pm »
Thanks Keenan, I'm working on one myself, should have a picture posted on Monday.
Logged
The only way to fail is to never start !

Offline John K

  • Member
  • Posts: 1,936
Re: Shark teeth
« Reply #3 on: April 17, 2010, 01:12:19 pm »
A picture of the shark tooth.  475 grains. Hardwood shoot.

[attachment deleted by admin]
Logged
The only way to fail is to never start !

Offline John K

  • Member
  • Posts: 1,936
Re: Shark teeth
« Reply #4 on: April 17, 2010, 01:13:07 pm »
One more.

[attachment deleted by admin]
Logged
The only way to fail is to never start !

half eye

  • Guest
Re: Shark teeth
« Reply #5 on: April 17, 2010, 06:30:53 pm »
John,
       Looks like an arrowhwad to me. Have you tried it for target penetration? I dont know squat about using sharks teeth but it looks like it would get the job done.
Rich
Logged

Offline John K

  • Member
  • Posts: 1,936
Re: Shark teeth
« Reply #6 on: April 19, 2010, 12:02:46 pm »
Rich, i have not shot this one, it's wall hanger for my uncle, who got me some teeth, i'm going to try shooting it this week, when i'm up Turkey hunting. Seems like it would be a great small game head !

John
Logged
The only way to fail is to never start !

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Shark teeth
« Reply #7 on: April 19, 2010, 12:09:42 pm »
Love that arrow! :)
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline John K

  • Member
  • Posts: 1,936
Re: Shark teeth
« Reply #8 on: April 19, 2010, 12:32:41 pm »
Thanks Patrick  :)
Logged
The only way to fail is to never start !
Pages: [1]
« previous next »