« previous next »
Pages: [1]

Author Topic: Feather placement  (Read 1624 times)

0 Members and 1 Guest are viewing this topic.

Offline chasing crow

  • Member
  • Posts: 269
Feather placement
« on: April 07, 2010, 08:16:06 am »
I fletched my first arrow last night. The shaft is made from a poplar shoot (I think it's poplar). I fletched with 2 feathers, just tied front and back with waxed linen thread. I mounted them straight, 90 degrees to the nock. After the fact, I see they typically are with the nock. Since I am shooting off a shelf, does it really matter? One quick trial shot was straight and hard. Felt pretty good. What do you think?
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline aero86

  • Member
  • Posts: 1,263
Re: Feather placement
« Reply #1 on: April 07, 2010, 09:56:47 am »
most would tie them parallel with the nock.  it will probably still shoot well, and still make noise if your shooting off a shelf.
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Feather placement
« Reply #2 on: April 07, 2010, 12:09:53 pm »
If they shoot well and fly well, shoot them. That is what matters with arrow flight.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chasing crow

  • Member
  • Posts: 269
Re: Feather placement
« Reply #3 on: April 07, 2010, 10:42:29 pm »
Thanks for the replys. I do tend to over think things. Pat you are right, I shot a few more times at lunch today and it flew great. what more do I want.
Chasing Crow
Logged
We know more than we think we do. Pass your knowledge on to our youth
Pages: [1]
« previous next »