« previous next »
Pages: [1]

Author Topic: heat treating a lam bow?  (Read 2426 times)

0 Members and 1 Guest are viewing this topic.

Offline Aries

  • Member
  • Posts: 493
heat treating a lam bow?
« on: April 06, 2010, 02:41:03 pm »
Hey i had a thought i thought id run cross the pro's.   I was  about to begin makin another bbo, and started thinking ::).

  we can heat treat the bellies of our self bows to boost performance, could we also do this with a lam bow.  I think there would be issues with heating the belly if the wood was already laminated because of the glue(im not really sure on that), so what about heat treating your belly wood before the glue up.  I dont really see why this wouldn't work. Do you think there would be any significant boos in performance, and what issues would I have to keep an eye out 4 if attempting this?  Thanks guys. Ty
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: heat treating a lam bow?
« Reply #1 on: April 06, 2010, 03:25:12 pm »
I did a makeover of a hickory backed yew bow to redo the R/D profile. Used a heat gun. Worked pretty well.
Logged
When you're retired, every day is Saturday

Offline Aries

  • Member
  • Posts: 493
Re: heat treating a lam bow?
« Reply #2 on: April 06, 2010, 03:28:03 pm »
Just realised the latest PA mag has an article over basically what im wanting to do lol ::). guess ill do some reading. Ty
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Aries

  • Member
  • Posts: 493
Re: heat treating a lam bow?
« Reply #3 on: April 06, 2010, 03:41:37 pm »
While were on glues... What about gorilla glue, it sure does make a mess if you dont keep an eye on the expansion, but it has a heck of a hold in my experience, do you recon it would be strong enough for a backing job? Ty
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline okiecountryboy

  • Member
  • Posts: 502
Re: heat treating a lam bow?
« Reply #4 on: April 06, 2010, 05:40:21 pm »
Hey Ty
Living in Arizona, I had some problems with a few home projects using gorilla glue. Arizona=mega heat! But that wasn't wood.
Give it a shot on a couple pieces of scrap wood, see what happens.. Once again, never tried it on wood.

Ron
Logged
God, honor, country, bows, and guns.

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: heat treating a lam bow?
« Reply #5 on: April 06, 2010, 05:57:02 pm »
Gorilla glue is not suitable for heat treated bows, its fine for just laminates with no heat treatment. Last bow i made I used it, I noticed the glue started melting where I applied heat. Luckily everything came out ok but I wont be using gorilla wood glue anymore.
Logged
CESAR

LEGIONNAIRE ARCHERY

Offline bubby

  • Member
  • Posts: 11,054
Re: heat treating a lam bow?
« Reply #6 on: April 07, 2010, 03:31:24 am »
the white gorilla glue is ok, but the original foams and expands, leaving air bubbles in the glue, bad things will happen
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Aries

  • Member
  • Posts: 493
Re: heat treating a lam bow?
« Reply #7 on: April 07, 2010, 10:43:27 am »
true on the bubbling effect, i could definitely see that causing issues.  I have successfully (probably luckily) glued together several handles and 2 bamboo backings with it. I think with the risks involved it might not be worth using for future projects.   

Does the glue used affect the amount of set a bow will take or performance in any way? Im sure it would effect performance if the glue failed of course ;D     
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline bubby

  • Member
  • Posts: 11,054
Re: heat treating a lam bow?
« Reply #8 on: April 09, 2010, 01:59:47 am »
aries, not sure about performance, but the r/d you glue in sure does
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »