« previous next »
Pages: [1] 2

Author Topic: pucker factor  (Read 4668 times)

0 Members and 3 Guests are viewing this topic.

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
pucker factor
« on: March 23, 2010, 10:32:19 am »
i picked up some butts of mahogony from a guy on ebay who sells slabs and had put aside the three biggest pieces untill i knew what i wanted to do with them. jesse inspired this one. after removing the rounded butt i had a piece with one knapped side and a flat sawn side and did the rest of the work with pressure and some antler punch work. that spot under my index finger had a fracture in it and i thought for sure it would break before i finished. just shy of ten inches. i gotta hand it to you guys who work with slabs cause i usually ruin them. the side that was cut (pictured)had some serious issues that i never thought id get clean. the tip on this one was a bear cause i couldnt figure out a good way to support it. dont know how you managed to support that 18" blade jesse. its raining so im gonna clean this one up and see if i can knock out another one.  ;D

Logged
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: pucker factor
« Reply #1 on: March 23, 2010, 10:38:08 am »
I'd have had 5 hunting points by the time I finished that one!  Good one ;)
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline DanaM

  • Member
  • Posts: 9,211
Re: pucker factor
« Reply #2 on: March 23, 2010, 10:53:37 am »
Cool blade haft that sucker up and go stick it in a bear :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: pucker factor
« Reply #3 on: March 23, 2010, 10:54:07 am »
thats perty great job
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: pucker factor
« Reply #4 on: March 23, 2010, 11:04:43 am »
Pucker factor's right - that looks plumb scarry!
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: pucker factor
« Reply #5 on: March 23, 2010, 11:06:20 am »
Very nice work jamie.That is a beauty. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: pucker factor
« Reply #6 on: March 23, 2010, 11:08:21 am »
yup thats a sweet one. cant figure how you guys arent breaking these long ones
Logged
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline brownhillboy

  • Member
  • Posts: 577
Re: pucker factor
« Reply #7 on: March 23, 2010, 02:21:30 pm »
Nice work!  I like it!  :)
Logged
south central VA

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: pucker factor
« Reply #8 on: March 23, 2010, 02:23:48 pm »
Nice chippin', Jamie. That's a wicked looking blade.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline sailordad

  • Member
  • Posts: 5,045
Re: pucker factor
« Reply #9 on: March 23, 2010, 08:01:19 pm »
Jaime, that thing is incredible
i was going for an 8" er over the weekend,ended up with multiple busted slabs
oh well they will still make points  ;D

and whos says knapping slabs aint real knapping
they present a whole new set of issues to get thru and still have a long blade left
great work
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: pucker factor
« Reply #10 on: March 23, 2010, 08:09:23 pm »
WAY TO GO Jamie!!
 Thats a kicking blade. very impressive!
Logged
Mililani Hawaii

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: pucker factor
« Reply #11 on: March 23, 2010, 10:21:45 pm »
thanks guys. tim it definetly is a different challenge working with the flat surface. biggest thing when i was cleaning up the flat side of this thing was knowing i could run a flake all the way across if it was lenticular but making myself slow down and run shorter flakes so i didnt build up a stack.
Logged
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: pucker factor
« Reply #12 on: March 23, 2010, 10:51:41 pm »
Nice work that is a long blade.  Don't let Butterfingers Magillicuddy handle that one. ;)
Logged
Traverse City, MI

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: pucker factor
« Reply #13 on: March 23, 2010, 11:03:31 pm »
 Nice blade, Jamie. aren't slabs fun? I worked on a long blade at the first Classic I went to. Hillbilly called it the lawnmower blade. I put it away till I got home for the clean-up work. I went out a day later to finish it and my cat had jumped on it and 3 blades. :'(
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Lombard

  • Guest
Re: pucker factor
« Reply #14 on: March 23, 2010, 11:04:25 pm »
Wicked good!
Logged
Pages: [1] 2
« previous next »