« previous next »
Pages: [1]

Author Topic: How To Center the Nock for the Nock Cut  (Read 2777 times)

0 Members and 1 Guest are viewing this topic.

MO Hawkeye

  • Guest
How To Center the Nock for the Nock Cut
« on: March 17, 2010, 03:33:03 pm »
I am am hoping there is a tool to place over the nock end of the arrow to guide in the nock cut.   I am very new at building arrows so any advice or suggestions would be helpful.

If there is NOT such a tool, how do I go about getting the cut centered?

Thanks,

Paul
Logged

Offline Stoker

  • Member
  • Posts: 1,729
Re: How To Center the Nock for the Nock Cut
« Reply #1 on: March 17, 2010, 03:43:17 pm »
I believe raptory archery has such a tool you require.
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Mechslasher

  • Member
  • Posts: 1,046
Re: How To Center the Nock for the Nock Cut
« Reply #2 on: March 17, 2010, 03:44:56 pm »
no tool that i know of.  just mark the center and cut down about 1/2".  then sand to fit string.
Logged
"A liberal is someone who feels a great debt to his fellow man, which debt he proposes to pay off with your money." 

G. Gordon Liddy

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: How To Center the Nock for the Nock Cut
« Reply #3 on: March 17, 2010, 03:54:35 pm »
I mark the centers..... then I cut them in with a 3 pack of Hacksaw Bladesn..works well for me
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline aero86

  • Member
  • Posts: 1,263
Re: How To Center the Nock for the Nock Cut
« Reply #4 on: March 17, 2010, 04:29:35 pm »
or a tile saw blade.
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: How To Center the Nock for the Nock Cut
« Reply #5 on: March 17, 2010, 04:59:09 pm »
Yep.....a Tile Saw Blade is perfect....even makes a round bottom....but I am a Cheap Yooper...and I make do..... ;D
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: How To Center the Nock for the Nock Cut
« Reply #6 on: March 17, 2010, 05:32:08 pm »
They make those tools, but I just eyeball it. After you do a few it's not hard to get 'em centered.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

MO Hawkeye

  • Guest
Re: How To Center the Nock for the Nock Cut
« Reply #7 on: March 17, 2010, 05:44:54 pm »
I guess, my question is how do you Exactly where the center line is?  What do you use to mark and gauge it?   I don't want one side to be off even .001 of an inch.

Thanks,

Paul
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: How To Center the Nock for the Nock Cut
« Reply #8 on: March 17, 2010, 06:06:33 pm »
 I just cut it with my bandsaw and then file it.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: How To Center the Nock for the Nock Cut
« Reply #9 on: March 17, 2010, 08:13:06 pm »
If you can shoot within a thousandth of an inch, you're all alone here. You don't have to have it that close, and unless you have a laser-guided cutting machine, you're not gonna get it cut that close either, no matter how you mark it. Bottom line, it just don't have to be that close. If your nocks are way off center or really crooked, it'll affect arrow flight, but there's plenty of leeway there before it gets to that point. I doubt if carbon arrows even have a .001" consistancy. I know that the people who have relied on bows and arrows to make their living for thousands of years didn't have a space-age nock cutter. This is the primitive archer website, not the Easton factory. You can complicate things to the point that you kill the hobby you're trying to enjoy. :)
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Lombard

  • Guest
Re: How To Center the Nock for the Nock Cut
« Reply #10 on: March 17, 2010, 08:50:01 pm »
Just eyeball it man, and make your mark. Trust your eye, and unless your hand shakes really bad you'll be close enough.
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: How To Center the Nock for the Nock Cut
« Reply #11 on: March 17, 2010, 09:11:42 pm »
OK, I will get some pictures of my homemade tool.......  I know I said that last time, but I really will..... eventually.  ;)
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: How To Center the Nock for the Nock Cut
« Reply #12 on: March 24, 2010, 08:06:39 am »
There is a tool,I have one but no pictures,I will get some pictures in a day or 2.But as others have said I did it for a long time by eye.My small band saw has a groove center on the blade so sometimes
when I am in a hurry I just lay it in the blade groove and cut them that way. :)
   Pappy
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline cracker

  • Member
  • Posts: 3,123
Re: How To Center the Nock for the Nock Cut
« Reply #13 on: March 24, 2010, 09:10:08 am »
This sounds like a case of perfect being the enemy of real good.Ron
Logged
If we can't help each other what is the point of being here?
Pages: [1]
« previous next »