« previous next »
Pages: 1 2 3 [4]

Author Topic: Compressing Shafts.  (Read 19507 times)

0 Members and 1 Guest are viewing this topic.

Offline agd68

  • Member
  • Posts: 306
Re: Compressing Shafts.
« Reply #45 on: March 01, 2010, 09:35:22 pm »
Ok, lets see if I got it all. Given you compensate for the loss of spine at the new diametre, a compressed shaft should be tougher and heavier than a noncompressed shaft of same wood. Right ?  :-\
Logged
Happiness is..
A wet lab, dirty gun, and a cold beer after a day on the Marsh

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Compressing Shafts.
« Reply #46 on: March 02, 2010, 07:46:30 pm »
 That's what I was thinking.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline CraigMBeckett

  • Member
  • Posts: 398
Re: Compressing Shafts.
« Reply #47 on: March 03, 2010, 05:16:28 am »

Quote
Ok, lets see if I got it all. Given you compensate for the loss of spine at the new diametre, a compressed shaft should be tougher and heavier than a noncompressed shaft of same wood

Correct, so I understand else why bother.

Mind you we are still waiting to hear more about it than Jamie's:

Quote
you lose 5lbs of spine

Craig.
Logged
Pages: 1 2 3 [4]
« previous next »