Gordon, I don't follow. By deflex limb, do you mean the straight limb that points down a bit? I used steam to reduce the reflex in the snaky limb (left in the pictures) because otherwise I figured the string would be too close to the grip when braced. Somehow it hasn't occured to me to add reflexed to the other instead when I did that.
The (almost) full draw pictures shows that the tip of the reflex limb doesn't move to the same level of the straight limb's tip. I measured how far each tip moves in the tiller picture. The tip of the reflexed limb moves by 130 pixels from unbraced to drawn, the other tips moves by 114 pixels. So the reflexed one is a bit weaker which is why I picked it as upper limb. I did that on purpose because I don't like my bows too asymmetric.
The first picture of the rough stave shows a view of the back of the bow. I think this picture may be a little confusing because I didn't indicate where I placed the bow. There is a big cut off branch right of the number 2. This spot is on the lower limb just below the grip.
I'll attach the pictures in a smaller size, I hope this works for everyone!
[attachment deleted by admin]
