« previous next »
Pages: [1]

Author Topic: Walnut question w/pics  (Read 3251 times)

0 Members and 1 Guest are viewing this topic.

Offline Scrub_buck

  • Member
  • Posts: 135
Walnut question w/pics
« on: February 20, 2010, 11:59:56 pm »
Went on a bow wood run today with a friend and found a small black walnut.  After getting it down, I realized the heartwood was not that big.  B Wal is a heartwood bow right, or can the sapwood be used??? 

Thanks in advance

[attachment deleted by admin]
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Walnut question w/pics
« Reply #1 on: February 21, 2010, 12:30:49 am »
The wood right under the bark is what you want. Treat BW like a whitewood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Walnut question w/pics
« Reply #2 on: February 21, 2010, 12:35:37 am »
Thanks Pat!  I think you have chimed in on every question I have asked on this forum.  I appreciate your help! 
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Walnut question w/pics
« Reply #3 on: February 21, 2010, 03:58:04 pm »
On a Small Piece like that...use both Sap and Heartwood...on a Larger Tree...you can get Piggyback Staves from them...and the Inside Stave will be all Black Heartwood.....I like them both...good wood....JMO
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Walnut question w/pics
« Reply #4 on: February 21, 2010, 04:30:27 pm »
It takes a pretty big tree to get enough heartwood to build a all heartwood bow. All the BW I've seen has had very thick sapwood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Walnut question w/pics
« Reply #5 on: February 21, 2010, 05:13:18 pm »
Quote from: Scrub_buck on February 21, 2010, 12:35:37 am
Thanks Pat!  I think you have chimed in on every question I have asked on this forum.  I appreciate your help! 

Pat is certainly not a know-it-all, but that guy knows pert near everything about bowmaking.  I know for a fact I have gleaned a lot of hard won tips from his postings.  He's also a great guy to do a trade with, he really did me right on the one trade I did with him.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Walnut question w/pics
« Reply #6 on: February 22, 2010, 04:56:23 pm »
I hope I didn't get too aggressive with this walnut.  It was so straight grained and easy to split, I ended up getting it down to bow sized staves easily.  I ended up halfing each quarter to produce 8 staves.

I was already done when I realized that the advice for elm was to let it dry some in bigger pieces to keep it from twisting up badly when it was drying.  Hopefully this walnut will be more of a gentleman while it is drying and stay relatively straight.  The staves average 3 inches across the back.... perfect.

Scrub

[attachment deleted by admin]
Logged

Offline John K

  • Member
  • Posts: 1,936
Re: Walnut question w/pics
« Reply #7 on: February 22, 2010, 05:51:00 pm »
Looks like some great stuff. You can always floor tiller one then clmp it down to form and let it dry. I did that and had a bow in about 60 days. After 30 days on the form i brough it inside and set it over the heat vent in my house.
Logged
The only way to fail is to never start !

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Walnut question w/pics
« Reply #8 on: February 22, 2010, 06:33:41 pm »
wanna trade a piece for anything Scrub?   :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Postman

  • Member
  • Posts: 1,154
Re: Walnut question w/pics
« Reply #9 on: February 22, 2010, 11:35:28 pm »
gorgeous staves- good luck, scrub_Buck!
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Walnut question w/pics
« Reply #10 on: February 23, 2010, 09:06:11 am »
Scrub, walnut is usually pretty well behaved when drying. It's not nearly as bad to warp and twist as some woods. The tree has to have some age on it before it builds up much heartwood.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline profsaffel

  • Member
  • Posts: 420
Re: Walnut question w/pics
« Reply #11 on: February 23, 2010, 09:40:54 am »
Mmmmm. That BW looks tasty... I love the sharp contrast between the heartwood and outerwood. You might cut off some of that heart for strips to make tips, handles, and nocks. That would look stunning.  :)
Logged
Professor of History, Student of Bowyery

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Walnut question w/pics
« Reply #12 on: February 23, 2010, 07:15:49 pm »
profsaffel:

That is an excellent idea.  Maybe that heartwood will be some currency for trading too.

Thanks,

Scrub
Logged

Offline rileyconcrete

  • Member
  • Posts: 606
Re: Walnut question w/pics
« Reply #13 on: February 23, 2010, 07:19:55 pm »
Srub,

If you are up for any trading PM me.  I wouldnt mind working a piece of that BW.
Great looking wood and good split job.

Tell
Logged
Tell Riley

Offline SkyShooter

  • Member
  • Posts: 7
Re: Walnut question w/pics
« Reply #14 on: March 08, 2010, 04:21:53 pm »
great BW staves, that sap wood is pretty forgiving too. have alotta fun!

sky
Logged
Pages: [1]
« previous next »