« previous next »
Pages: 1 [2]

Author Topic: My first "recurve"....  (Read 8034 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode

  • Member
  • Posts: 400
Re: My first "recurve"....
« Reply #15 on: February 08, 2010, 06:57:47 pm »
Very nice!  He'll like it, and there isn't anything better than a good raccoon barbecue!
Frode
Logged
If it doesn't rap the lintel, it might not be a longbow.

AKmud

  • Guest
Re: My first "recurve"....
« Reply #16 on: February 09, 2010, 04:11:24 am »
Quote from: radius on February 08, 2010, 06:47:39 am
it looks great!  did you heat the back??

Yes I did right near the handle.  I clamped it in about 3" of reflex then toasted 5" either side of the handle area for about 10 minutes then got a little hotter to where it started turning dark.  The board held almost all 3" right away, but lost it and came out even during tillering.  I have never heard/read anything about heating the back, but it seems to work and is holding up through about 200 arrows so far.   :-\
Logged

radius

  • Guest
Re: My first "recurve"....
« Reply #17 on: February 09, 2010, 07:09:17 am »
lately, some guys have been blowing our standards out of the water, regarding how we treat the back of the bow.  First of all, denny and half-eye go carving the back end to end, completely violating the rules, and here you go heating it.  Okay, re-think time.

But, why did you cook the back and not the belly?
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: My first "recurve"....
« Reply #18 on: February 09, 2010, 01:21:48 pm »
Lots of nice bows poppin' up here right now;
this is another nice one!
Logged
Frank from Germany...

AKmud

  • Guest
Re: My first "recurve"....
« Reply #19 on: February 09, 2010, 03:00:33 pm »
Quote from: radius on February 09, 2010, 07:09:17 am

But, why did you cook the back and not the belly?


To tell the truth....I'm not sure....  :-\  I guess simply because of the way I clamped it to the bench.  I had the handle clamped down directly to the bench with the limb tips blocked up 3".  I knew I wanted to apply heat near the handle and didn't really think about it being the back or the belly.  I measured off 5" either side of the handle and kept my heat inside that mark.  I think it accents the black leather pretty well to boot!  :)
Logged

Offline ryanfromcanada

  • Member
  • Posts: 40
Re: My first "recurve"....
« Reply #20 on: February 10, 2010, 11:01:56 pm »


[/quote]

... I measured off 5" either side of the handle and kept my heat inside that mark.  I think it accents the black leather pretty well to boot!  :)
[/quote]
That was my thoughts exactly when i saw it. Its real purrty.
Logged

Offline Bullitt

  • Member
  • Posts: 205
Re: My first "recurve"....
« Reply #21 on: February 10, 2010, 11:42:08 pm »
Yeah, I can see the 'coons standing in line to lay down beside that beauty for a pic! ;D
Logged

Offline zenmonkeyman

  • Member
  • Posts: 482
Re: My first "recurve"....
« Reply #22 on: February 11, 2010, 03:06:20 am »
Very nice work!  This one even makes me think about revisiting my own red oak board bow...
Logged
If the ppl ever allow private banks to control their currency, 1st by inflation, then by deflation, the banks & corporations that will grow up around (these banks) will deprive the ppl of all property until their children wake up homeless on the continent their fathers conquered. Thomas Jefferson

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: My first "recurve"....
« Reply #23 on: February 11, 2010, 01:37:08 pm »
That is a fine bow. Bookmarked, too, for Feb Self BOM fun :)
Logged
When you're retired, every day is Saturday

Offline Aries

  • Member
  • Posts: 493
Re: My first "recurve"....
« Reply #24 on: February 11, 2010, 06:00:08 pm »
you said red oak.. is that a board bow????
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline kerryb

  • Member
  • Posts: 315
Re: My first "recurve"....
« Reply #25 on: February 11, 2010, 07:10:04 pm »
beautiful bow, congrats
Logged
Milan Mo

Offline gmc

  • Member
  • Posts: 513
Re: My first "recurve"....
« Reply #26 on: February 11, 2010, 07:29:17 pm »
Tiller looks great on that bow, nice job.
Logged
Central Kentucky

AKmud

  • Guest
Re: My first "recurve"....
« Reply #27 on: February 11, 2010, 10:46:38 pm »
Quote from: Aries on February 11, 2010, 06:00:08 pm
you said red oak.. is that a board bow????


Yep, straight from the lumber yard  ;)
Logged

Offline juniper junkie

  • Member
  • Posts: 714
Re: My first "recurve"....
« Reply #28 on: February 12, 2010, 12:07:36 am »
very nice job!! like the tips very unique.
Logged
Pages: 1 [2]
« previous next »