« previous next »
Pages: [1]

Author Topic: help with starting  (Read 2415 times)

0 Members and 1 Guest are viewing this topic.

jim_bob

  • Guest
help with starting
« on: January 28, 2010, 05:12:16 pm »
recently a very good guy and member of this forum, nugget, helped me get started with flintnapping and sent me some stuff to do it with. i want to try to make a few blades but dont know how  ??? i cant figure out how to work the stone into a flat peice to make the blade. is there any site i can go to to figure it out?
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: help with starting
« Reply #1 on: January 28, 2010, 05:15:01 pm »
Go to youtube and search for flintknapping. There are some excellent videos on there. I would also recommend getting DC Waldorf's book "The Art of Flintknapping."And try to get to a knap-in, that will really spedd up your learning curve when you can watch people knap and ask questions.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: help with starting
« Reply #2 on: January 28, 2010, 05:41:40 pm »
I concur wholeheartedly ;D. Youtube's, books, vid's, and tonnage. Your best bet is to sit down with somebody who already know's.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

jim_bob

  • Guest
Re: help with starting
« Reply #3 on: January 28, 2010, 06:02:34 pm »
thanks, do you know of any nap-ins in georgia?
Logged

Offline bryan irwin

  • Member
  • Posts: 671
Re: help with starting
« Reply #4 on: January 28, 2010, 07:57:29 pm »
look at the calender theres a napp in  in april near you dont you live in white Ga. i will be there and billy from canton will be there theres a lot of venders selling rock and tools  see you there.
Logged
bryan irwin

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: help with starting
« Reply #5 on: January 28, 2010, 08:06:20 pm »
jim do a search on here for billy. i believe he's from georgia.
Logged
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

jim_bob

  • Guest
Re: help with starting
« Reply #6 on: January 28, 2010, 08:31:13 pm »
he is, i will see everyone at the nap in then?
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: help with starting
« Reply #7 on: January 28, 2010, 08:52:23 pm »
 There will be a couple in North Florida in Febuary.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Bill Skinner

  • Member
  • Posts: 384
Re: help with starting
« Reply #8 on: January 28, 2010, 10:46:27 pm »
There will be two in Alabama in March.  Bill
Logged
Pages: [1]
« previous next »