« previous next »
Pages: [1]

Author Topic: Closing in on my Hickory bow  (Read 2926 times)

0 Members and 1 Guest are viewing this topic.

Offline Scrub_buck

  • Member
  • Posts: 135
Closing in on my Hickory bow
« on: January 16, 2010, 03:06:34 pm »
Still a bit too heavy, but I have the limbs bending well at a quick low brace.  The good news is that I am getting very little set and string follow from the floor tillering and the short sessions on the tillering tree up till this point.  I know I have a ways to go, but this one is looking good so far! 

[attachment deleted by admin]
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Closing in on my Hickory bow
« Reply #1 on: January 16, 2010, 03:21:14 pm »
Let's see it bend  ;D
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: Closing in on my Hickory bow
« Reply #2 on: January 16, 2010, 03:27:32 pm »
Quote from: adb on January 16, 2010, 03:21:14 pm
Let's see it bend  ;D

what he said and some specs on it too would be nice  ;)
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Closing in on my Hickory bow
« Reply #3 on: January 16, 2010, 04:45:03 pm »
A couple of more pics ...

the brace is now 5.5 inches, and the draw is to 24 inches.  I know that right limb needs to bend a little more!

BTW:  65" NTN and around 1.5 inches at the fades going down to .4 inches at the nocks.  I am unsure of the weight ... I don't have a scale.  Feels like high 50's at 26 inches.

[attachment deleted by admin]
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: Closing in on my Hickory bow
« Reply #4 on: January 16, 2010, 07:47:54 pm »
looking pretty good,and yup a little on the right limb

if you have a bathroom scale,non digital one,you can check draw weight with that.that all i use cause i am to checp to buy a bow scale
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Lombard

  • Guest
Re: Closing in on my Hickory bow
« Reply #5 on: January 16, 2010, 08:34:11 pm »
Looks like you are getting there Scrub_buck.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Closing in on my Hickory bow
« Reply #6 on: January 16, 2010, 08:40:33 pm »
If that bow was mine, I'd make it bend a bit more right out of the fade on the right limb.
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Closing in on my Hickory bow
« Reply #7 on: January 17, 2010, 12:37:33 am »
I would also take and get the Limbs both Bending more right out of the Fades...and as for the right limb needing to Bend more...I don't think so...just work the first third out of the Fades...but go slow...and don't take too much at a Time.
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Closing in on my Hickory bow
« Reply #8 on: January 17, 2010, 11:14:38 am »
Looks great. If yo need more than a couple inches of draw then do as El says. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Closing in on my Hickory bow
« Reply #9 on: January 18, 2010, 04:02:49 pm »
More pics. .. I am very close, but there still seem something a little wacky about that right limb.

6 1/4 brace ...
24" draw ....
28.5 " draw

[attachment deleted by admin]
Logged

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Closing in on my Hickory bow
« Reply #10 on: January 18, 2010, 04:06:11 pm »
Seems a tad stiff in the yellow circle????

[attachment deleted by admin]
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Closing in on my Hickory bow
« Reply #11 on: January 18, 2010, 08:11:14 pm »
I think you're on the right track, but GO SLOW! A couple of scraps can make a big difference. I'd call it a bow.
Logged

Offline Strongbow88

  • Member
  • Posts: 91
Re: Closing in on my Hickory bow
« Reply #12 on: January 18, 2010, 10:13:52 pm »
How much set has it taken 1.5 '' is a little narrow for hickory. And the bow is a little short for that width.
Logged
Danny Johnson

Offline Scrub_buck

  • Member
  • Posts: 135
Re: Closing in on my Hickory bow
« Reply #13 on: January 18, 2010, 10:46:57 pm »
Strongbow ... It has taken maybe 3/4 of and inch of set and maybe 1 to 1.5 inches of S. Follow.  It started with just a hair of reflex in both limbs, now unstrung, it shows just a little backset and the limbs arch with just a smidgen of follow.  

I know it was pushing it ... I am making this for a friend and he has a 28 to 28.5 inch draw.  It was the best I could do with the stave.  It is working nicely now, but the shoot-in will tell the tale.  I hope to get it shooting this week.  Maybe it will hold together.

I am planning on shooting it some this week and seeing how the limbs look afterwards.  If everyhting stays the same, I hope to work that right limb slightly ... but if it doesn't smooth out really quick, I am going to call it finished.

Thanks again and i will post picks after the shoot in.

Scrub
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,893
  • if you have to ask you wouldn't understand ,Tenn.
Re: Closing in on my Hickory bow
« Reply #14 on: January 19, 2010, 08:31:20 am »
I would also go with the yellow circle.Other than that I think it is looking pretty nice.   :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »