« previous next »
Pages: [1]

Author Topic: elb handle placement  (Read 2154 times)

0 Members and 1 Guest are viewing this topic.

Offline youngbowyer33

  • Member
  • Posts: 606
elb handle placement
« on: January 05, 2010, 10:27:00 am »
im laying out an elb, and i am wondering if i make the center of the bow(lengthwise) the top of the handle, and therefore have 1 limb(the top one) be longer than the bottom limb. Or is it the center of the bow is the center of the handle and have both limbs the same length?thanks
Logged
"All we have to decide is what to do with the time that is given to us"

Offline Et_tu_brute

  • Member
  • Posts: 74
Re: elb handle placement
« Reply #1 on: January 05, 2010, 10:37:28 am »
For an ELB the top of the handle is 1" above the centre, so for laying out the handle section mark the centre, then 3" below for the bottom limb/bottom of the grip and 1" above centre for the top limb/top of the grip. This way the bottom limb is still a little shorter, so it's best to leave it a little stiffer.
Logged

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: elb handle placement
« Reply #2 on: January 05, 2010, 04:18:20 pm »
Youngbow, I leave 1 1/4 inch above the center line for the upper limb and 2 3/4 below center for the lower limb. As stated above, leave the bottom limb a little stronger.
Logged
" To be, or not to be"...decisions, decisions, decisions.
Pages: [1]
« previous next »