« previous next »
Pages: [1] 2

Author Topic: How to secure the blade to the handle?  (Read 5996 times)

0 Members and 1 Guest are viewing this topic.

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
How to secure the blade to the handle?
« on: December 30, 2009, 02:01:56 am »
How does that work?  Just sinew?  Does anyone have any pictures of the joint?

Thanks in advance!
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline sailordad

  • Member
  • Posts: 5,045
Re: How to secure the blade to the handle?
« Reply #1 on: December 30, 2009, 02:46:47 am »
well it all depends on the blade and the look i want from the knife
some i make real pretty and cut notch in the wood ,fill it with epoxy and insert the blade
others that i want a primiteve look,cut notch,apply hot pitch,insert blade,let cool,wrap with sinew

as far as the joint goes,i mke the notch in the wood slightly bigger than the thickness of the blade
this way there leaves rom for the adhesive and room to adjust the blade so its more or less centered
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: How to secure the blade to the handle?
« Reply #2 on: December 30, 2009, 09:14:09 am »
 I just mounted one yesterday. I'll take a picture when I get home from work. I have started using 5 minute JBWeld on mine. It fills in the gaps real good.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: How to secure the blade to the handle?
« Reply #3 on: December 30, 2009, 11:29:48 am »
Thanks guys.  I apparently have a lot to do before I get anywhere near that point.  I'm wanting to make a knife...I bought a cheap plate at Wal-Mart to practice with.  I can't seem to get the flakes to come off consistently...my edges look all curvy and I can't get some places to even come to a clean edge...the pressure flakes come up at way to sharp an angle or there's a flat spot on the edge.

Fun fun fun lol
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: How to secure the blade to the handle?
« Reply #4 on: December 30, 2009, 12:19:18 pm »
I do like Eddie, but with 5 minute epoxy.

Go to one of the local floor tile stores and ask if they have broken porcelain tile you can have. The thickness is great and the price is right. Not all porcelain is created equal so it might not all work, but when it is free you can afford to throw away a little.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: How to secure the blade to the handle?
« Reply #5 on: December 30, 2009, 12:35:14 pm »
Thanks, Justin.  I'll ask the next time I'm in Lowes or something.  I'm going to have to go through quite a bit to get my edges figured out I think.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: How to secure the blade to the handle?
« Reply #6 on: December 30, 2009, 07:16:40 pm »
 Here you go. I'll finish it tonight.

[attachment deleted by admin]
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: How to secure the blade to the handle?
« Reply #7 on: December 30, 2009, 07:27:40 pm »
How much of the blade is actually IN the handle?  Nice, btw.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: How to secure the blade to the handle?
« Reply #8 on: December 30, 2009, 07:35:24 pm »
Quote from: makenzie71 on December 30, 2009, 07:27:40 pm
How much of the blade is actually IN the handle?  Nice, btw.

Enough........... >:D

I use either Oitch or JB Weld...and I haft it with Pig Gut after the Glue sets...and then coat the wet Gut with Hide Glue to finsh it off....

[attachment deleted by admin]
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: How to secure the blade to the handle?
« Reply #9 on: December 30, 2009, 07:50:39 pm »
That's pretty nice.

Man if I can just get those long, shallow flakes down you guys got going across the blade I'll be in business.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: How to secure the blade to the handle?
« Reply #10 on: December 30, 2009, 07:54:52 pm »
Quote from: makenzie71 on December 30, 2009, 07:50:39 pm
That's pretty nice.

Man if I can just get those long, shallow flakes down you guys got going across the blade I'll be in business.

It's all in the platforms and balance between inward and downward pressure with the flaker. Grind those platforms, and make sure they're below the center line, but not all the way even with the bottom. Most of your pressure should be directed inward.  Flakes don't travel far on a flat surface, they follow ridges, and won't run through dips.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: How to secure the blade to the handle?
« Reply #11 on: December 30, 2009, 10:02:03 pm »
  Finished, It has about an inch in the handle.

[attachment deleted by admin]
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: How to secure the blade to the handle?
« Reply #12 on: December 30, 2009, 10:48:16 pm »
How big is that, Mullet?
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: How to secure the blade to the handle?
« Reply #13 on: December 30, 2009, 11:56:49 pm »
 Mak, it is 7" tip to tip. The blade was 4" before mounting.  It is wrapped in Hemp.
« Last Edit: December 31, 2009, 12:00:27 am by mullet »
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline sailordad

  • Member
  • Posts: 5,045
Re: How to secure the blade to the handle?
« Reply #14 on: December 31, 2009, 12:03:17 am »
man eddie that is a sweet looking knife
very very nice,and i love the wrap on it too
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd
Pages: [1] 2
« previous next »