Author Topic: Best finish for unbacked osage  (Read 1836 times)

0 Members and 1 Guest are viewing this topic.

Offline rileyconcrete

  • Member
  • Posts: 606
Best finish for unbacked osage
« on: December 19, 2009, 09:51:16 pm »
just looking for some ideas on finishes for unbacked osage. any thoughts? recomendations?
Tell Riley

Offline PaulN/KS

  • Member
  • Posts: 1,388
Re: Best finish for unbacked osage
« Reply #1 on: December 19, 2009, 11:27:12 pm »
Tru oil is a big favorite. I have also had good luck rubbing in satin tung oil finish.

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Best finish for unbacked osage
« Reply #2 on: December 19, 2009, 11:28:06 pm »
My favorite is Tru oil, I've also used Waterlox and a Parrafin finish.  The parrafin is looks very natural, but needs to be reapplied every once and a while.
Traverse City, MI

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Best finish for unbacked osage
« Reply #3 on: December 19, 2009, 11:38:45 pm »
3 coats of Tru Oil will fill the pores. Followed it up with 3 coats of spar urethane. At least that's what I do for osage. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Best finish for unbacked osage
« Reply #4 on: December 19, 2009, 11:44:02 pm »
I like 5 or 6 coats of Tru-Oil(rub down with 0000steel wool between coats) with a quick shot of satin poly to cut the shine of the Tru-Oil.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Best finish for unbacked osage
« Reply #5 on: December 20, 2009, 01:40:28 am »
tru oil all the way... i use between 5 and 8 coats, you will know when it is enough... don't get any in your mouth though...yuck!   ;D  -josh
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln