« previous next »
Pages: [1]

Author Topic: pin knot question  (Read 2208 times)

0 Members and 1 Guest are viewing this topic.

Offline Scrub_buck

  • Member
  • Posts: 135
pin knot question
« on: December 17, 2009, 10:03:50 pm »
How bad are these two pin knots going to mess me up?  They are side by side and no matter which way I lean the bow in the stave they are going to hit a limb.  How short can you go with osage?  I might be able to shorten the bow some and push those knots out towards the tips.
Scrub

[attachment deleted by admin]
Logged

Roger

  • Guest
Re: pin knot question
« Reply #1 on: December 17, 2009, 10:06:53 pm »
What's your width or intended width. Looks like a non issue to me. Pins aren't usually a prob unless you cut through them on the back.

R.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: pin knot question
« Reply #2 on: December 17, 2009, 10:15:42 pm »
 Those won't hurt anything. But if you want to make yourself feel better, lightly heat it with a heat gun and soak thin, Loc-Tite super glue into them.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline adb

  • Member
  • Posts: 5,339
Re: pin knot question
« Reply #3 on: December 17, 2009, 10:54:24 pm »
Knots? What knots? I dont see any knots.
Logged

Offline woodstick

  • Member
  • Posts: 899
Re: pin knot question
« Reply #4 on: December 17, 2009, 11:17:39 pm »
i made a bow for jay stcharles that had if iam right a little over 20 in it, he has been shooting it for a couple years  now.
Logged
a drawn bow is a stick 9/10 broken

Offline sailordad

  • Member
  • Posts: 5,045
Re: pin knot question
« Reply #5 on: December 18, 2009, 12:01:05 am »
i dont see anything to worry about
i thought you had a problem with some knots or something ;)
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Scrub_buck

  • Member
  • Posts: 135
Re: pin knot question
« Reply #6 on: December 18, 2009, 12:21:29 am »
The problem is that they are more than likely be far enough out on the limb to be on the edge.  I think I recall somewhere that knots on the edge of the limb is not a good thing.  I could be wrong.

I suppose I could leave enough wood around them .. but its going to look like I am shooitng a bow with a flyswatter built into the limb. 
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: pin knot question
« Reply #7 on: December 18, 2009, 06:28:34 am »
I wouldn't worry about them,try and keep them in the middle ,best you can and carry on.
Sometimes if they are on the edge I will rap them but most times I do nothing. :) Take your
time and make sure you follow the growth rig over the knot.The grain gets really thin as you
approach the knot and over the top. :)
    Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »