« previous next »
Pages: [1]

Author Topic: tillering tips  (Read 3349 times)

0 Members and 1 Guest are viewing this topic.

Offline yazoo

  • Member
  • Posts: 485
tillering tips
« on: February 03, 2010, 08:50:07 pm »
how close does everyone bend the limbs toward the tips,some guys leave a few inches stiff some dont how do you do yours?
Logged
if you can shoot over them , they ain't to far

Offline DanaM

  • Member
  • Posts: 9,211
Re: tillering tips
« Reply #1 on: February 03, 2010, 09:02:18 pm »
Mike it depends on the bow, if its a short D bow make her bend from tip to tip, where on a longer bow I will usually leave the tips stiff
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Gordon

  • Member
  • Posts: 3,299
Re: tillering tips
« Reply #2 on: February 03, 2010, 09:38:42 pm »
I keep the last couple of inches stiff if the tips are overlayed, otherwise the overlays can work their way loose.
Logged
Gordon

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,904
  • if you have to ask you wouldn't understand ,Tenn.
Re: tillering tips
« Reply #3 on: February 04, 2010, 06:32:12 am »
I usually leave the last 6 inches or so stiff. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: tillering tips
« Reply #4 on: February 04, 2010, 11:40:02 am »
i leave the last 4 to 6 inches stiff on alot of mine for two reasons:  1.  the tip overlays  2.  Sometimes I bring the bow into final tiller without ever unbracing it so it is harder to scrape up there with the string still on  :o .  I know it's bad....   :) -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: tillering tips
« Reply #5 on: February 04, 2010, 11:41:25 am »
That's what I do. I leave the last 6 inches or so stiff. It does depend on the bow's length though. Often the wood I work does what it wants to do anyway. :) Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline adb

  • Member
  • Posts: 5,339
Re: tillering tips
« Reply #6 on: February 04, 2010, 12:00:06 pm »
I tend to leave the last 4-5ins on the stiff side, even for bendy handle bows.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: tillering tips
« Reply #7 on: February 04, 2010, 05:01:13 pm »
Mike, I generally leave 4" to 6" of each tip stiff.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: tillering tips
« Reply #8 on: February 04, 2010, 05:25:37 pm »
Like most everybody else-last 4"-6" stiff.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
Pages: [1]
« previous next »