« previous next »
Pages: [1]

Author Topic: Urac 185 cure time  (Read 1763 times)

0 Members and 1 Guest are viewing this topic.

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Urac 185 cure time
« on: November 14, 2009, 10:17:12 am »
How long after you let your Urac cure do you start bending your laminate bow and tillering?   Can you start right away after the recommended drying time or should you wait a couple of days?  Thanks!   :)  -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Dano

  • Member
  • Posts: 1,349
Re: Urac 185 cure time
« Reply #1 on: November 14, 2009, 10:23:35 am »
Urac doesn't induce moisture, so really you could start working the limbs right away, but have patience and give it some extra time, another day doesn't hurt.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Urac 185 cure time
« Reply #2 on: November 14, 2009, 10:35:03 am »
thanks, Dano  :)  -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline sulphur

  • Member
  • Posts: 321
Re: Urac 185 cure time
« Reply #3 on: November 14, 2009, 08:45:49 pm »
if your heat curing it you can start in about 6 hrs(4 hrs cook time, 2 cool down).  other wise wait the whole 24 hrs cure time.
Logged
Pages: [1]
« previous next »