« previous next »
Pages: [1]

Author Topic: Japanese Binding?  (Read 3857 times)

0 Members and 1 Guest are viewing this topic.

Rhinegold

  • Guest
Japanese Binding?
« on: October 12, 2009, 03:25:11 pm »
Hi all, first post here with an obscure question about the binding used on traditional Japanese arrows.

1. Did they always use silk?

2. Are the bindings coated with some water resistant adhesive?

I figure there must be at least ONE person here who knows!
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Japanese Binding?
« Reply #1 on: October 12, 2009, 04:12:25 pm »
I use super glue to seal silk bindings on arrows. Like Frank said the Japanese arrow bindings were probably silk and I believe they used a lacquer sealer.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Rhinegold

  • Guest
Re: Japanese Binding?
« Reply #2 on: October 12, 2009, 09:35:45 pm »
Quote from: Pat B on October 12, 2009, 04:12:25 pm
I use super glue to seal silk bindings on arrows. Like Frank said the Japanese arrow bindings were probably silk and I believe they used a lacquer sealer.
Ah, thanks...is the silk thread stretchy?

Is there some special weight or type?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Japanese Binding?
« Reply #3 on: October 12, 2009, 10:24:25 pm »
Silk thread is not stretchy. I get it from 3Rivers. it comes in red, blue , green, yellow and black.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline medicinewheel

  • Member
  • Posts: 3,627
Re: Japanese Binding?
« Reply #4 on: October 13, 2009, 02:18:21 am »
The lacquer sealer originally used was Urushi; but to work Urushi is an art in itself! Very beautiful!
Logged
Frank from Germany...

Offline shikari

  • Member
  • Posts: 167
Re: Japanese Binding?
« Reply #5 on: October 13, 2009, 08:54:07 pm »
cherry bark was also used on the arrows behind the feathers in particularly ornate arrows as well.
Logged

Offline medicinewheel

  • Member
  • Posts: 3,627
Re: Japanese Binding?
« Reply #6 on: October 14, 2009, 03:18:58 am »
Pictures anyone??
Found some on the WWW

[attachment deleted by admin]
« Last Edit: October 14, 2009, 06:51:58 am by medicinewheel »
Logged
Frank from Germany...

Far East Archer

  • Guest
Re: Japanese Binding?
« Reply #7 on: October 14, 2009, 10:18:22 am »
^
looks like sambu-kyugu's work, they do nice job.

I use cherry bark before, but never seen it used before for Japanese arrow.
As he say, ornamental or gift arrow.

Now we just using lacquer or epoxy for coating. embroidery thread #9 or machine thread #50.
Just use a normal wood glue to stick thread to shaft.
Lance Xiao has many nice pictures on flickr you should see.
Logged

Rhinegold

  • Guest
Re: Japanese Binding?
« Reply #8 on: October 14, 2009, 12:13:46 pm »
Thanks for all the replies!

Ive already learned that its a mistake to use anything glossy as a coating...so I might end up with a waterproof marine satin varathane.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Japanese Binding?
« Reply #9 on: October 14, 2009, 01:34:38 pm »
The way Art Butner showed me was to make your wrap, add the super glue and even it out(I use my finger; found out if it stays liquid you won't get stuck!  ;D ) and let it set. Then with very fine sand paper smooth the cured glue/thread and add another coat, sand and so on. Usually 2 or 3 coats will give you a smooth finish and by sanding with the fine sand paper the wrap comes out smooth but with a dull finish. If you have to remove the wrap you have to cut if off and it will come off as a solid band.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Rhinegold

  • Guest
Re: Japanese Binding?
« Reply #10 on: October 14, 2009, 02:09:13 pm »
Quote from: Pat B on October 14, 2009, 01:34:38 pm
Usually 2 or 3 coats will give you a smooth finish and by sanding with the fine sand paper the wrap comes out smooth but with a dull finish.
I just tried that with 0000 steel wool instead for a duller low luster gloss...gives the wood a nice silky feel too!
« Last Edit: October 20, 2009, 07:01:17 pm by Rhinegold »
Logged

Offline Tom Leemans

  • Member
  • Posts: 524
Re: Japanese Binding?
« Reply #11 on: October 20, 2009, 01:13:24 pm »
I just recently found crazy glue in a new brush dispenser bottle. Even has purple dye in it that dries clear so you know when not to touch it. ;) I've been brushing it along the feather bases for insurance.
Logged

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: Japanese Binding?
« Reply #12 on: October 21, 2009, 09:59:51 am »
Quote from: Tom Leemans on October 20, 2009, 01:13:24 pm
I just recently found crazy glue in a new brush dispenser bottle. Even has purple dye in it that dries clear so you know when not to touch it. ;) I've been brushing it along the feather bases for insurance.

i gotta go find some of that!  ;D
Logged
lets just shoot it

Rhinegold

  • Guest
Re: Japanese Binding?
« Reply #13 on: October 22, 2009, 08:30:02 pm »
Quote
i gotta go find some of that!  ;D

Logged
Pages: [1]
« previous next »