« previous next »
Pages: [1]

Author Topic: Any suggestions for fixing broken self nocks?  (Read 2188 times)

0 Members and 1 Guest are viewing this topic.

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Any suggestions for fixing broken self nocks?
« on: October 12, 2009, 09:56:46 pm »
Anyone have any ideas for fixing broken self nocks on Tonkin shafts.  I hit a couple and don't really want to part with the arrows.
Thanks for any advice
Rick


Logged
Traverse City, MI

Offline boo

  • Member
  • Posts: 343
Re: Any suggestions for fixing broken self nocks?
« Reply #1 on: October 12, 2009, 10:11:56 pm »
Trim it and make another nock. thats what i do. You may have to cut some of the quills off the back end of the fletching?  depending on how much room you had to start with.
Logged
Boo

Offline scattershot

  • Member
  • Posts: 161
Re: Any suggestions for fixing broken self nocks?
« Reply #2 on: October 13, 2009, 12:04:37 pm »
You can either trim it like boo says or cut it off square and insert a wooden nock. You can make those by chucking up a piece of hardwood dowel in a drill and dressing one end down until you have a smaller diameter section to insert in the shaft, and then dress the outside portion to the diameter of the shaft and cut a new nock.
Logged
"Experience is just a series of non-fatal mistakes"

Offline Cromm

  • Member
  • Posts: 1,065
Re: Any suggestions for fixing broken self nocks?
« Reply #3 on: October 13, 2009, 04:10:32 pm »
Hi,
I have taken the fletchs off,cut off the bad bits,re self nock, wrap with sinew, put fletchs back on and away I go.
Logged
Great Britain.
Home of the Longbowman.
Pages: [1]
« previous next »