« previous next »
Pages: [1]

Author Topic: bamboo help  (Read 2158 times)

0 Members and 1 Guest are viewing this topic.

Offline man with stick,s

  • Member
  • Posts: 5
bamboo help
« on: September 25, 2009, 10:42:52 pm »
are there any good splitting tools for bamboo
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: bamboo help
« Reply #1 on: September 25, 2009, 10:46:23 pm »
i used a hatchet and  a hammer on my last 3" diameter piece.   just started a split and then hammered on the back of my hatchet to continue the split the length of the bamboo.  Hope this helps!   :)  -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline HoBow

  • Member
  • Posts: 1,439
  • The choices we make dictate the lives we lead.
Re: bamboo help
« Reply #2 on: September 25, 2009, 10:56:10 pm »
I have a bamboo splitter.  I pulled this picture offline.  Get the four way splitter- it works best.

[attachment deleted by admin]
Logged
Jeff Utley- Atlanta GA

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: bamboo help
« Reply #3 on: September 26, 2009, 08:28:29 am »
I've used a thin-bladed machete, works fairly well.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline man with stick,s

  • Member
  • Posts: 5
Re: bamboo help
« Reply #4 on: September 28, 2009, 03:05:12 pm »
thanks
Logged

Offline Kent D.

  • Member
  • Posts: 331
Re: bamboo help
« Reply #5 on: September 28, 2009, 03:13:30 pm »
I use a knife and follow a natural split.  When there is no split, i use an axe.
Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: bamboo help
« Reply #6 on: September 28, 2009, 03:34:49 pm »
Machete or knife.  Hatchet is useful.  I've been wondering, though - what do people use to get it flat for backing?  A belt sander?  Sorry - don't mean to hijack the thread...
Logged
1’—>1’
Pages: [1]
« previous next »